What are the implemented alternative / renewable energy in Architecture and Urban Planning or Civil Engineering as well !
Please check these links and pdf attachments.
http://www.sciencedirect.com/science/article/pii/S1876610212016438
http://www.urbanafrica.net/opportunities/15260/
Good evening
You may want to familliarise with:
http://environment-ecology.com/energy-and-architecture/659-renewable-energy-in-architecture-resources.html
Also with the Merton Rule
http://www.icax.co.uk/The_Merton_Rule.html
With best wishes
Vladimir
Thanks a lot
Dear Aicha,
Just recently I published an overview of different energy generation technologies and how cities deal with that with some colleagues, based on results from a recent EU FP7 project (www.pleecproject.eu). I enclose the article.
Best, Christian
http://jssp.reviste.ubbcluj.ro/arhiva/vsn52016en.html
Article Urban Energy Generation and the Role of Cities
fro a large structure, can we assign springs to an element for a damage simulation
02 March 2015 8,550 1 View
The theory of retrofitting steel structure with composite materials/Carbon fiber, the material characteristic, the advantages or disadvantages that we can get. Any idea/document that may help....
01 February 2015 9,567 7 View
Modelization using MATLAB is quite powerful, can I simulate a damage structure by removing an element and run the analysis? But if I would like to simulate an actual crack, any ideas?
01 February 2015 3,330 8 View
Probabilistic gives a probability, what about the semi-probabilistic ?
31 December 2014 9,847 3 View
An International Conference of Steel Construction and Mixed is about to take place at Tlemcen City in Algeria the next October. To Submit an abstract, you have until the 10th February in the...
31 December 2014 5,495 0 View
How can I apply the newmark method for a bridge truss using Matlab the simplest way (I'm a beginner ,don't have much skills in matlab) ?
31 December 2014 2,754 6 View
Safety is a necessity, and for the assessment of structures, getting a reliability index is interesting and helpful, but how can we calculate it, and which code gives the best index?
31 December 2014 6,233 12 View
If a beam is damaged, corroded or cracked, how could be reinforced ?
31 December 2014 2,059 9 View
Could you recommend some articles on Urban Transportation System optimization and Innovation?
13 August 2024 2,595 3 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
How to develop investments in renewable energy sources?
08 August 2024 5,112 3 View
I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...
05 August 2024 3,290 1 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...
30 July 2024 9,824 2 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
I am looking to predict some production for future onshore wind energy production in Portugal, is there any database with info of performances of the existing wind farms in the country? something...
28 July 2024 1,750 1 View
Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...
28 July 2024 5,771 2 View