What are the main XRD peaks of VO2 ?

We are deposition of VO2 thin film with CuO and ZnO .

04 May 2018 2,481 2 View

Does anyone have information about preparing and studying Cu2O-ZnO-Fe2O3 composite ?

I want to study optical properties of Cu2O-ZnO-Fe2O3 composite and doped with VO2 by PLD as a thin film.

09 October 2017 6,924 0 View

Can Any one help to provide me a multilayers antireflctiv coating software ?

I need a software to calculating thickness and refractive index of multi layers anti reflective coating to enhance solar cell efficiency.

03 April 2017 8,019 5 View

What is the best method to prevent aggregation during preparation of Au , Ag , Ag-Au core-shell collide by laser ablation?

What is the best method to prevent aggregation during preparation of Au , Ag , Ag-Au core-shell collide by laser ablation. We suffer so much from the state of agglomeration during the preparation...

02 March 2017 3,024 5 View

Can any one suggest materiel to deposited on solar cell to enhance efficiency?

we work on increasing the efficiency of solar cell by deposit Anti-reflection thin film .

02 March 2017 9,328 5 View

Can anyone provide me the method or way to diffrentate between tetragonal or cubic and hexagonal directly from XRD pattern without standerd card ?

A specialist in X-ray diffraction data analysis can distinguish the crystal structure directly from the diffraction peaks

05 June 2016 6,173 4 View

Can any one provide me the data of X-ray diffraction of ZnO and Co ?

We prepare thin film of ZnO:Co by laser ablation but the peaks intensities are very weak like amorphous . Why?

15 January 2016 2,298 7 View

Can any one provide me the data of X-ray diffraction of ZnO and Co ?

We prepare thin film of ZnO:Co by laser ablation but the peaks intensities are very weak like amorphous . Why?

31 December 2015 590 8 View

Can anyone provide a graph program more advanced than Excel program?

05 June 2015 137 4 View

Can anyone give me the XRD-data or pattern of Pt and Au-Ag alloy?

Or a ASTM card? XRD-Data

02 March 2015 2,257 4 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to determine solutionizing time for cast Al alloys?

For wrought alloys soaking time at solutionizing temperature is determined by thickness .Do we have such standards for cast Al alloys

23 February 2021 8,839 3 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

Which thermal conductivity test recommended for Ag-Cu nanofluid?

I have prepared Ag-Cu alloy with polymer coating upon it.... how can I measure thermal conductivity of it ?

22 February 2021 5,915 3 View

How to generate AA6061 alloy or any aluminium alloy crystal in material studio?

I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.

22 February 2021 1,410 1 View