Yasmeen Ghassan

8 Questions 16 Answers 0 Followers

Questions related from Yasmeen Ghassan

How to use "inelastic heat fraction" option in abaqus?

HELP NEEDED! Hi everyone Any idea how to do heat generation due to deformation using the option "inelastic heat fraction" Please don't mention friction examples, i know how how to do...

22 February 2023 2,449 0 View

How to do proper surface definition error in abaqus?

Help i am getting the following error message in abaqus **WARNING: Surf-1 is ambiguously connected at node ###. This surface cannot be used with *CONTACT PAIR. ***ERROR: 1 improperly defined...

17 November 2022 1,996 3 View

Copying of mesh patterns (ABAQUS)?

Hi everyone, So i have an orphan mesh of a composite material, i want to duplicate it couple of time side by side so it would work together. I have tried the option "copy mesh patterns" but...

10 October 2022 3,470 3 View

Help Please!! how to solve the error "too many attempts made for this increment" in abaqus?

i am applying a load of 50KN gradually on a reinforced concrete beam, i'm unloading this load using an amplitude to get the loading and unloading versus deflection graph.i have used concrete...

10 June 2017 3,375 14 View

How to model 3 point bending test on abaqus by defining the force applied?

hello dears i want to apply a 3 point bending test on a beam using abaqus , i've found this helpful video https://www.youtube.com/watch?v=soYwaW54WRg where the user applies a specified...

10 April 2017 3,420 5 View

How to get the frequencies of simply supported RC beam when changing load in ABAQUS?

i have modeled the RC beam with simply supported BC and used concrete damaged plasticity model to account for the nonlinearities in concrete, i have got the frequency value for the case of beam...

02 January 2017 851 6 View

How can i model simply supported RC beam with different static loading on it to get different frequency due to the increase in load in ABAQUS?

i have modeled the RC beam with simply supported BC and used concrete smeared cracking to account for the nonlinearities in concrete, i have got the frequency value for the case of beam under its...

01 December 2016 7,578 9 View

What to consider when using smeared cracking model in abaqus to model an RC beam?

i have used damaged plasticity model in abaqus to represent concrete for RC beam modelling, i have got good deflections compared to literature. but when using smeared cracking model for the same...

01 January 1970 9,254 3 View