Vinod Belwanshi

5 Questions 4 Answers 0 Followers

Questions related from Vinod Belwanshi

How to fabricate a custom made fixure for measurement of dielectric constant using Agilent 4294a impedance analyser?

I am looking to create a custom test fixture to measure the dielectric constant of a specific material using the Agilent 4294A Impedance Analyzer. Can you provide guidance on the design and...

29 July 2024 6,484 3 View

How can I mesh a thin body (thickness ratio is 1/50 or more)?

Hi All, I have made a 3D model of cantilever with two parts (bottom and top layers). The first part (bottom layer) is 10 μm thick and second part (top layer) is 0.2 μm thick. I have used the...

13 January 2022 4,216 5 View

What is the cleaning procedures of thermal evaporator chamber after Indium or Lead evaporation?

Hi All, I wish to perform Indium (In) and Lead (Pb) evaporation in two separate substrates of silicon. As In and Pb are toxic and carcinogenic respectively, it must require to clean the thermal...

05 March 2021 1,952 4 View

How to simulate temperature induced effects in the deformation, induced stress and the resonant frequency of cantilever beam?

Hi All, I am working on the Ansys workbench 18.1 in order to simulate the temperature-induced effects in deformation, induced stress and the resonant frequency of cantilever beam. Also, I wish to...

25 February 2020 3,801 0 View

How to measure thicknesses of stack of dielectric?

It is required to measure thicknesses of dielectric layers on top of silicon substrate. On silicon substrate, TiN thin layer, then SiO2 thin layer and then HfO2 thin layer. All the layers are...

07 September 2019 2,633 3 View