T.P. Ismail

5 Questions 2 Answers 0 Followers

Questions related from T.P. Ismail

Which is the best etchent for austanitic steel (304,316 Etc) to use in Replica metallography (Field metallography)?

etchant for insitu metallography or Replica metallography for austenitic steel.it found to be very difficult to find good and fast etchant to use in replica. I tried 1:1 HCl:HNO3, water based...

11 November 2016 739 2 View

Which is the best open source FEA analyser?

I would like to know the best open source FEA analyser for static and dynamic analysis.

01 January 2015 3,333 4 View

Any ideas as to why there is a non agreement within XRD and LRS results?

XRD and LRS analysis was done for finding corrosion products after a corrosion test on the surface of metal. But the XRD results are showing a compound which is not detected by LRS. What could be...

05 May 2014 7,807 1 View

This is SEM image of martasitic steel(aisi 4340) fracture surface . Any idea what type fracture occured and waht type morepholigcal feature is this?

first image near to the beach mark area second image near to the fast fracture zone

01 January 1970 4,522 0 View

Is there any book to refer for microstrucutral analysis of boiler tubes(1Cr-0.5Mo steel, 2.25Cr-1Mo steel tubes)?

life assessment and creep analysis. microstructural changes in long term exposure to high temperature and pressure

01 January 1970 2,712 8 View