10 Questions 28 Answers 0 Followers
Questions related from Tapash Chandra Paul
During the deposition of thin films glass substrates are used.
10 October 2019 3,401 3 View
The average crystalline size was calculated from the full-width at half-maximum (FWHM) of XRD lines by using the Debye–Scherrer formula:
06 June 2019 2,300 3 View
Crystal Structure of MoO3 is hexagonal.
03 March 2019 3,860 3 View
XRD pattern shows that the samples are crystalline in nature.
12 December 2018 3,417 4 View
Applications: such as Photocatalytic activities, biomaterials, dielectric materials, sensors, solar cells, LEDs
12 December 2018 5,948 0 View
Oxide based transparent conducting materials such as TiO2, SnO2, ZnO, In2O3 etc. have been investigated over the decades for the solar cell application, architectural windows, heat reflectors,...
12 December 2018 4,385 0 View
I have characterized the sample by FTIR spectroscopy.
12 December 2018 3,404 2 View
In our work pure TiO2 and Fe doped TiO2 thin films were deposited onto glass substrates by the spray pyrolysis technique with the substrate temperature 4500C. The structural, electrical, optical...
12 December 2018 3,988 3 View
The dislocation density is estimated from the following relation using the Williamson and Smallman formula.
12 December 2018 6,495 1 View
Characterizations of thin films are carried out by various techniques such as FESEM, EDX, XRD, FTIR, UV-visible spectroscopy and DC electrical measurements etc.
12 December 2018 5,461 0 View
