Srinivasarao Alluri

7 Questions 5 Answers 0 Followers

Questions related from Srinivasarao Alluri

Opinion on Connectors?

Please give your opinion on these connectors. Are these connectors useful for a 1 to 40 GHz printed monopole antenna with tapered microstrip feed width varying from 2.95 mm to 1.6 mm. Substrate...

16 September 2019 7,167 3 View

What should be the distance between two identical antennas to measure group delay for face to face and side by side configuration?

Can any one please tell me what should be the minimum/maximum distance between two identical super wide band antennas to measure group delay, isolation (both magnitude and phase) and fidelity...

10 September 2019 6,237 5 View

Can anyone pleease provide Information about Connectors useful upto 40 GHz?

I have designed and simulated a super wideband antenna in HFSS. Simulation results gave a bandwidth from 2.2 GHz to 30 GHz for S11 < -10 dB and other results are also good. A lossy FR4...

05 September 2019 3,841 4 View

How to model SMA connector in HFSS?

Can any one please tell me how to model and simulate SMA connector in HFSS as shown in the attached file. Thanks and Regards, Srinivasarao Alluri.

13 March 2018 7,667 4 View

How to identify connectors for an antenna?

I have designed a super wideband antenna having 1 GHz to 40 GHz bandwidth using HFSS and i got simulated results. Now i would like to fabricate and make some VSWR, input impedance, radiation...

05 March 2018 1,166 6 View

What is the thickness of copper used in antenna design?

Practically in antenna design patch, feed and ground are made with copper sheets with non zero thickness. what is the thickness of copper used for ground, patch and feed in antenna design if the...

04 March 2018 2,578 9 View

How to verify an antenna designed in HFSS in CST?

I have designed an antenna in HFSS. I would like to cross verify the results of it in CST. Can any one guide me how to do it. Thanks in advance. Srinivasarao Alluri.

04 March 2018 3,289 6 View