Shivaditya Chatterjee

8 Questions 2 Answers 0 Followers

Questions related from Shivaditya Chatterjee

Can we have a generic dynamic model of Hydrogen Alkaline Electrolyser for DIgsilent Power Factory 22 or MATLAB Model?

We are currently working in a microgrid project, where we have 6.5 MW solar power plant and 5.5 MW electrolyser load. There will be BESS connected to the solar, to provide night time auxillary...

13 January 2023 623 1 View

Why in open loop operation of boost converter the output voltage across the load does not dip even if i increase the load? why it is happening?

I have a simple DC/DC boost converter open operation simulated in MATLAB Simulink, i have calculated the inductor, capacitor value according to the system requirements. But the problem that i am...

14 July 2020 8,690 0 View

How to design a bidirectional droop for interlinking converter in ac-dc hybrid microgrid in MATLAB Simulink?

to show power-sharing between ac-dc grid, as loads are connected to both in ac and dc side when there is high load demand on the dc side, the power will be fed from ac side (surplus power) and if...

02 November 2019 9,334 0 View

How we can use dual loop control for droop control strategy implementing it in switching of inverter for bidirectional power flow between ac-dc gird ?

In an ac-dc hybrid microgrid, for power-sharing, we need an interlinking converter, so droop control strategy is needed for power-sharing between AC utility grid (Load is connected to AC bus bar )...

06 October 2019 6,704 0 View

How to determine the LCL or LC filter values while the inverter is connected to three phase grid ? how can i get an optimized value of L and C?

In microgrid operation, the filter takes a huge responsibility of giving a perfect sinusoid (without any harmonics), but the problem is how to calculate the best value of L and C for a filter?...

06 October 2019 7,793 2 View

How to tune P, PI, PID controllers Kp, Ki values in droop control strategy for controlling the microgrid power flow?

one of the most critical situations comes when we want to tune the controllers in microgrid whether it is a voltage controller or current controller. the system has to go a lot of transients...

05 October 2019 4,439 0 View

Why d-q reference frame is taken into consideration while designing a controller in microgrid system?

while I am designing the droop control strategy for switching of the inverter, to show power flow between dc-ac and ac-dc side, I have noticed in most of the paper they have taken three-phase...

04 October 2019 5,543 4 View

How to show power sharing between ac-dc hybrid microgrid using interlinking converter with droop control strategy?

I am currently working on AC-DC hybrid microgrid, so to show power share between ac grid side-dc microgrid side in both grid-connected and as well as in islanded mode, i need an interlinking...

29 September 2019 5,348 2 View