Muhammad Junaid Anjum

9 Questions 10 Answers 0 Followers

Questions related from Muhammad Junaid Anjum

Which reference electrode can be used to study corrosion the metal in Li-based battery electrolyte?

which reference electrode can be used to study corrosion of the metal in Li-based battery electrolyte? As LiPF6 can produce HF which can dissolve the glass, or if you use Ag/AgCl reference...

01 February 2024 3,801 2 View

How long an open bottle of Li-based electrolytes can be used?

I want to ask. once the bottle of LiPF6 in DMC is opened in the glovebox. How long we can use that open-bottle electrolyte? or how long the electrolyte inside the bottle will not be contaminated....

23 January 2024 2,128 1 View

Literature required for Ni and chromate based coatings for pure copper?

I am searching literature for pure nickel coating and Ni-P coating on pure copper and I found few works on Ni-P coating but did not find anything on pure Ni coating on copper. Moreover, people use...

04 September 2023 3,146 0 View

Which reference electrode is suitable for corrosion testing of metal in hydrofluoric acid? and why?

If we wish to test corrosion of metallic materials in the HF solution then which reference electrode should be the choice what factors should we consider to choose the reference electrode for...

19 May 2023 3,505 7 View

Sample preparation and corrosion cell requirements for corrosion testing in HF?

I am trying to figure out what type of corrosion cell we can use to carry out corrosion experiment in hydrofluoric acid. I am afraid if I prepare samples in epoxy it will cover the surface and...

18 May 2023 856 2 View

Aluminum pouch cell battery tabs?

I have few questions related to pouch cell battery tabs. 1. What are the principle conversion coatings industrially/commercially applied on the Al cell tabs for Li-ion batteries? 2. What is the...

15 February 2023 1,635 3 View

Why is strong oxidizing agent like H2O2 used with Ce based corrosion inhibitors?

Ce3+ is better or Ce4+ better for corrosion inhibition? if Ce3+ is better then why oxidizing agents are added with Ce?

15 April 2020 5,840 4 View

How to evaluate the value of the double layer capacitance represented by a CPE?

to evaluate the value of the double layer capacitance represented by a CPE using Burg's Formula??

03 March 2019 7,076 4 View

What to do if your Open circuit potential is not stable?

my OCP is not stable even after 1.5 hours. what should i do for the optimization? what could be the reasons for not getting stable OCP

12 August 2018 1,421 7 View