7 Questions 4 Answers 0 Followers
Questions related from Mir Basar Suhaib
Greetings. I am modelling a steel beam (using shell elements) retrofitted with an adhesively bonded FRP plate subjected to web crippling. The adhesive material has been modelled using cohesive...
20 March 2023 7,997 4 View
I am modelling a composite steel beam where in the steel beam and FRP both are modelled as a shell (S4R) and the adhesive is modelled as a cohesive solid (COH3D8). Adhesive is the slave surface...
29 November 2021 2,950 1 View
We have a loading frame equipped with 6 LVDTs which are connected to a data logger (DAS). There is a peculiar erractic functioning. Sometimes, LVDTs work just fine and readings are acceptable....
11 August 2021 9,181 0 View
Greetings. I am analysing a steel beam under flexure in ABAQUS CAE. I have modelled the beam (made from 1.2mm thin plate) using shell elements. I need to provide a thicker web stiffener ( 6mm...
08 August 2021 7,898 1 View
I am analyzing a built up thin walled steel I-Beam formed by connecting two channel sections back to back. So there is an obvious large surface in contact. The model has geometric as well as...
25 April 2020 3,215 1 View
I am analyzing a thin walled steel I-beam (formed by connecting two channel sections back to back). The analysis involves two steps- an elastic Buckling Analysis followed by a Non-Linear Static...
04 April 2020 8,430 0 View
I am performing a four point bending test on a cold formed steel I-Beam with non linear geometric and material properties in ABAQUS. I am applying load on two rigid plates. The load is applied as...
03 April 2019 9,088 12 View
