Mahreen Aslam

11 Questions 24 Answers 0 Followers

Questions related from Mahreen Aslam

How to get resistance value from Nyquist plot?

I measured resistance of my solid electrolyte with Au as blocking electrode. Real impedance value did not start from zero value, rather higher than zero value. Should I subtract that value of real...

10 October 2013 2,520 18 View

What do the positive values of imaginary part in nyquist plot mean?

Usually when we measure the impedance for solid state electrolytes then they show a semicircle that starts at a high frequency and a line at a low frequency. Semicircle represents the bulk and the...

09 September 2013 2,092 2 View

What is the best method to assemble a thin film battery cell?

If we deposite Ctahode and electrolyte on Cu or Al foil then what will be the best way to assemble a cell for battery??

08 August 2013 7,264 2 View

How can we measure elemental atomic percentage by X-ray photo electron spectroscopy?

I never did XPS before.I want to know that XPS spectra provide directly atomic percentage of all elements in thin film or we have to do some work on spectrum to measure this? What kind of software...

07 July 2013 5,150 15 View

What is the meant by in plane and out of plane crystal growth?

What is the difference between these two?

05 May 2013 7,052 0 View

Can anybody help me in analysing FTIR spectrum of Thin film of LiPON on SiO2 substrate?

I deposited film and got this spectrum. Film is very thin of the order of less than 100nm.I want to confirm the presence of Phosphate group. Can anybody kindly help me in analyzing the spectrum...

05 May 2013 8,059 6 View

How does size of particles effect ionic conductivity in solids?

ionic Conductivity will increase or decrease if we decrease the size of grains(approaching nm) in solids?

04 April 2013 9,941 1 View

How can I measure the thickness of thin film using cross sectional image obtained using SEM?

Is there any software or any other technique?

04 April 2013 805 11 View

For a Li ion thin film electrolyte, is it necessary to get amorphous film for better results, or can we have crystalline film for good result?

In many papers, electrolytes for thin film batteries are amorphous, what is main reason for this?

03 March 2013 8,234 4 View

What is the best precursor as Lithium source for atomic layer deposition?

I want to deposite Li ion battery using ALD technique.Is there any suggestion for lithium precursor?

11 November 2012 9,209 5 View

How to calculate warburg element from equivalent circuit of impedance nyquist plot of cell?

If we measure the conductivity of cell using EIS method then we get a semicircle and a line making some angle with real part of impedance i.e x-axis. I want to calculate the warburg element from...

06 June 2012 2,462 17 View