10 Questions 4 Answers 0 Followers
Questions related from M. Karthikeyan
I am working on microalgae cultivation using waste water. The initial concentration of nutrients were less but the microalgae has achieved biomass growth of 2 g/L. The final concentration of...
09 August 2024 4,679 2 View
Currently, I am working on algae-based wastewater treatment. in order to check the effect of various parameters towards treatment efficiency, I want to vary the COD, Nitrate, Nitrite, and...
14 September 2023 3,544 3 View
in a typical MFC H+ ions will form in anode chamber. it is supposed to go through the membrane to the cathode. many of the research papers use CEM. how is it possible, since H+ and NH4+ are the...
15 June 2023 2,779 1 View
Currently, I am working in microbial fuel cells I want to collect secondary data and analyse it to make a predictive model. while collecting I can't find all the data in verbal form. they were in...
15 May 2023 981 2 View
I am doing electrochemical studies for my nanocatalyst. From the research paper, I found that, for accurate results CV/LSV should be IR compensated. So I did ZIR compensation. I have attached the...
14 May 2023 2,802 2 View
I used the hydrothermal method to create nanoparticles and adjusted the time and reaction temperature to produce catalysts of different sizes. To validate the change in surface area, I conducted a...
12 May 2023 6,301 3 View
can we use the ANN-GA optimisation algorithm to optimize chemical reactions? if yes minimum how much data is required? currently, I am working with a catalytic process I want to optimize the...
10 May 2023 7,485 1 View
I am working on HER nanocatalysts, i have synthesized the catalyst with various temperatures. after we did BET analysis. it shows each sample has various range of size and pore volume. can we...
10 May 2023 1,784 4 View
I converted E(V) into E vs RHE and then calculated the value of overpotential. I converted the current (A) to the current density (mA/cm2) and took the logarithmic value. I took the log J value...
24 April 2023 8,178 2 View
which part of this graph should I use for the Tafel slope?
01 January 1970 9,805 2 View