8 Questions 16 Answers 0 Followers
Questions related from John Paul Dominic Palma Ferrer
Is it possible to have higher degradation of wastewater in visible light? I was degrading methylene blue using a photocatalyst and it showed higher degradation in visible light than UV light...
02 July 2019 7,513 8 View
Would immobilization of CuO/TiO2 using cement paste for photocatalytic water splitting have adverse effects in the generation of hydrogen?
25 February 2019 1,136 4 View
Does this picture show inadequate mixing during wet impregnation? I doped TiO2 with CuNO3 solution. After calcining at 400 deg C for 5 hours, the catalyst looked like this with gradient color of...
18 February 2019 9,838 4 View
Would different precursor volume for increasing copper content in doping TiO2 give some bias to the procesS? I have dissolved CuNo3 tri hydrate because it liquefies. A parameter of my experiment...
21 January 2019 4,235 1 View
What should be my basis in choosing whether excess soution impregnation or incipient wetness impregnation in doping TiO2 with CuO?
17 September 2018 9,536 3 View
Do I need to reduce CuO with hydrogen at a high temperature if I'm gonna use it with TiO2 in gaseous-phase water splitting?
01 August 2018 2,507 2 View
I've read many papers which use only a few milligrams of the solid catalyst. I'm thinking that the reactor bed is not covered with enough catalyst. Is it okay with that? Is the reaction catalyzed...
17 July 2018 2,318 14 View
Would the addition of UV light increase the conversion efficiency of CO and H2O in a water-gas shift reaction at a lower temperature? CuO coupled with ZnO is a good photocatalyst.
09 July 2018 1,483 5 View
