8 Questions 25 Answers 0 Followers
Questions related from Helena Mirzabeigi
I want to synthesize porous Cu/Zn-nanoparticle@carbon by pyrolysis of metal organic framework and then add this material to carbon paper based gas diffusion electrode to reduce CO2. Is it possible?
27 November 2020 5,262 1 View
in ammonia plants to produce hydrogen NG is passed through primary reformer which is steam methan reforming, then partially converted gas goes to secondary reformer. in some books secondary...
22 December 2019 8,180 0 View
wastewater specification: COD=High pH=2-3 can we use some extractor like TEHA (Triethyl hexyl amine)?? any other suggestion for H2SO4 removal??
19 August 2015 8,514 12 View
Are activated sludge,SBR ,UASB, RBC, WSP Kinds of these ways??? or these are used for BOD removal?
17 August 2015 575 18 View
Industrial waste with low pH (1-2) and high COD (4000 ppm) was neutralized with lime and its pH reaches to 9...is this treatment effects on COD level too? what's the final COD after neutralization?
08 August 2015 7,991 8 View
in VCM/EDC plant large scale of liquid wastes are produced. These wastes are chlorinated hydrocarbons and the main parts of these are trichloroethane and EDC.
04 July 2015 4,027 3 View
http://www.catalysts.basf.com/p02/USWeb-Internet/en_GB/content/microsites/catalysts/prods-inds/adsorbents/alum-silica-gel-adsorb As if it used in oil refinery in which part?
06 June 2015 7,305 6 View
Fertilizer, Poultry & Animal Feed.
23 November 2013 3,745 6 View
