7 Questions 43 Answers 0 Followers
Questions related from Farid Movassagh-Alanagh
Is there any equation to estimate the life time of a nickel electroplating bath (Watts-type solution) based on the concentration of the used salts, current density, deposition time and cathode's...
01 January 2019 3,814 6 View
We need a cheap, water-soluble and heat-shrinking polymer which can be found easily. What polymer or co-polymer could be used?
12 December 2018 6,540 8 View
I am trying to deposit a pure nickel coating on a stainless steel substrate by means of a conventional electroplating process. But the deposited coatings have not shown an acceptable mechanical...
07 July 2018 2,197 8 View
I have explored in ASTM-B117 and also ISO-9227 which are two frequently used specifications for salt spray test. However there is not any information about the determination of test duration for a...
03 March 2018 3,951 11 View
We have some coated carbon fibers and we want to observe the deposited layer and also if it is possible, its morphology. How can we prepare our sample? Is that enough to cut carbon fibers in short...
03 March 2017 6,918 4 View
we have a MWCNTs based composite. our MWCNTs are about 30-50 nm in length.
07 July 2016 1,047 5 View
I have synthesized a thin ceramic coating with a thickness range about 8-10 microns. I need to have an elemental analyse of this coating. Can I use XRF for this purpose? is there any other method?
06 June 2016 8,869 2 View