Eduardo Andres Morales

4 Questions 5 Answers 0 Followers

Questions related from Eduardo Andres Morales

What is the best way to assess the performance of a so-called EM (Effective Microorganisms) applied into a waste stabilization pond?

Domestic wastewater treatment system consists of 2 systems of aerated (40000 m3 each), facultative (87500 m3 each), and maturation ponds (50000 m3 each) working in parallel. Total flow for the...

10 August 2014 999 7 View

Which in situ parameter should I use to characterize an incoming industrial wastewater at the entrance to a domestic wastewater treatment plant?

In situ parameter like pH, Temperature, etc/ The idea is give the engineer useful data of assesing an industrial discharge on the entrance of a decentralized domestic WWTP. Thanks for the help.

30 April 2014 8,547 4 View

What temperature should be used for rating a mechanically aerated lagoon, ambient or pond temperature?

This is focused on the rating of existing surface aerators, from a decentralized waste stabilizations series of ponds in Ecuador (mechanically aerated, facultative and maturation ponds). Ambient...

16 January 2014 137 1 View

What are the best kinetic models for design/evaluate a partial mix aerated lagoon besides the O'Connor and Eckenfelder model (1961)?

This partial mix lagoon or also called facultative-aerated lagoon is located in Guayaquil, Ecuador. It will process domestic wastewater with a BOD of 320 mg/L. Min Temperature = 24 degrees...

09 November 2013 4,339 0 View