and what things control shape,size and direction of growth of them?
like the attachment file that is silicon nano particle
Thank you very much for your answer.
02 March 2017 4,466 3 View
Thanks for your help.....
11 December 2016 4,612 1 View
I need HR-TEM image of silicon nano particle If you have any article contain that images please send to me. thanks a lot
09 October 2016 4,528 4 View
08 September 2016 585 9 View
08 September 2016 2,166 11 View
07 August 2016 9,411 3 View
03 April 2016 1,137 6 View
03 April 2016 3,326 6 View
03 April 2016 1,500 3 View
02 March 2016 9,905 7 View
I anwar by adsorption or reaction ..but it is either more method...
02 March 2021 4,811 2 View
I took measurements of different concentrations of 15 nm and 5 nm Au nano particle solutions. I'm trying to determine which concentration I measured gives the best reading overall. I also...
02 March 2021 7,626 1 View
Incompletely cross-linked pdms are difficult to remove.
01 March 2021 798 3 View
L1 and L2 regularization
28 February 2021 4,187 3 View
I am wanting to run a serial mediation model with 2 x IVs, 2 x MVs, and 3 DPs (all continuous). Is it problematic to run 2 different models for each IV, keeping the MVs and DPs the same in each...
27 February 2021 5,681 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
In the formation of Zno nano particles process, after drying at 120 degree C, my zno nano particles are completely white but when i calcine it for 450 degree C it converts into grey colour. i...
26 February 2021 2,435 4 View
I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...
22 February 2021 1,400 4 View
We have deposited silicon carbide on carbon substrate using one PVD technique. Due to amorphous behavior of SiC at low deposition temperature, we performed heat treatment of those films at...
22 February 2021 2,072 3 View
Are there any types of cylindrical cell culture inserts that are designed to confine cell seeding area? Say, if I'm using a 12 well plate (3.5 cm^2/well), but only want to seed cells in the middle...
22 February 2021 7,127 4 View