I was wondering if anybody can help me with interpreting the permanent deformation behaviour of Unbound Granular Materials?

I compacted unbound aggregates at optimum moisture content and then let it dry in the oven for one day. The repeated load triaxial test was carried out on this sample in which I faced a weird...

07 August 2019 3,311 9 View

How can I find an specific equation that can describe the relationship between X and Y in the attached file?

Given the presented scatter-plot, it is looking like that there is a relationship between X and Y in my data. Unfortunately, the simple nonlinear curves can not describe this relationship....

01 February 2019 7,076 32 View

Can anybody help me with obtaining the curvature of a function?

I have a function as follows: y= a*x^b a=7e-5 b=-0.755 I attached a simple graph of the function. As it is apparent from the graph the CURVATURE of the function increases from ZERO to a finite...

01 February 2019 7,703 8 View

Can anybody help me with my XRD test results?

I have andesite source of road aggregates. I did XRD test on bulk powder and oriented samples ((1) air dried, (2) treated with ethylene glycol at 60oC, and (3) heat-treated at 550 oC for 45...

11 December 2018 6,211 3 View

Does anybody has any idea about the equation of the compaction curve of granular materials and how the Optimum Moisture Content can be calculated?

I mean after doing the compaction practice in various water contents and determining the dry density corresponding to each water content, what would be the equation of the resultant compaction...

10 November 2018 7,199 11 View

Can you please help me with the correction of my CBR curve (Load- Penetration Curve)?

I conducted CBR tests on unbounded aggregates. As you can see the CBR test results in the attachment, the curves concave up and there is a relatively enormous shift between two test results....

10 November 2018 1,292 7 View

Can anybody help me with a data prediction?

I have a sort of data in which the change in the weight of materials is recorded during the time. Unfortunately because of special condition I cannot record the weight in the first 75 seconds. -...

09 October 2018 2,479 13 View

Any advice how can I determine the proportion of Yellow-ish and Brown-ish color in a color photo?

A solution in MATLAB Software is preferred.

09 October 2018 7,916 5 View

How can I recognize the weathering of the glass phase in my materials?

Could you please find the attached image and let me know if the presented data can show any weathering in the glass. Based on my understanding, the glass in the structure of my materials remained...

09 October 2018 7,981 1 View

How can I plot 95% confidence interval for a nonlinear regression line?

SPSS software is preferable :)

08 September 2018 2,083 5 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View