Why is Ion implantation called low temperature process while it needs annealing afterwards?

Md Maksudul Hossain @Md_Maksudul_Hossain

08 August 2018 0 2K Report

I was wondering why Ion implantation is low temperature process while it needs annealing anyways. Is that annealing temperature still less than typical diffusion?

Badges
Science topic

RNA later for the preservation of RNA in fecal samples at room temperature for one day (37°C)?

I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...

06 August 2024 1,367 3 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Why is the molecule's orientation with an electric field affect polarizability?

Why is the molecule's orientation with an electric field affect polarizability? Electrons are diffuse enough to be independent with respect to orientation and effect of electric field on...

03 August 2024 7,843 1 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

Why my gel electrophoresis has smearing?

Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...

22 July 2024 9,761 5 View

Appearance of crystallization peak in heating cycle of DSC test?

For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...

18 July 2024 348 3 View

Would anyone care to recommend an inexpensive waterproof serviceable (e.g., batteries can be changed) temperature logger?

I've been using Hobo pendants for years but they are up from less than $50 a few years ago to over $100, and I'm in need of an alternative.

08 July 2024 7,164 1 View

Does anyone know how to improve calcium-imaging fluorescence with GRIN lenses?

Hey everyone, I've been working with GRIN lenses (Inscopix) for almost 1 year and still had no luck seeing strong fluorescence on them. When I look at them, I can see good blood flow and,...

08 July 2024 5,178 2 View

How to troubleshoot error E1 on Biorad Powerpac Basic despite using sufficient and fresh buffer?

I have used this BIorad Powerpac Basic for 4 years now, before which it was used for another 5-6 years. Generally we addressed the E1 error by compensating with fresh buffer and/or filling the...

01 July 2024 7,104 1 View

Is it possible to define exothermic processes in finite element software like COMSOL? If yes, how can this be done?

We aim to study an exothermic process and evaluate its temporal changes. Could you recommend suitable software for this purpose and explain how to conduct this analysis? What specific data is...

30 June 2024 8,413 1 View