Hello Ong!

Sorry, I do not have a definitive answer, but some ideas:

• 1) Here you can find a series of videos about RES2MOD and RES2INV a https://www.youtube.com/watch?v=90QcVuEfICE&list=PL_djVw7XAQ2crHVaaHTX7v7KlqorreDfW&index=8
• 2) Did you try to run one of the sample files provided by RES2INV itself? I would expect no errors with the sample datasets. Your sample datasets should be somewhere in a folder similar to "C:\Program Files (x86)\Geotomosoft Solutions\Res2dmod"
• 3) If the error persists even with sample datasets, I would delete and re-install the software to be sure to restore the original settings

Mariana Gómez-Nicolás

Hello Gomez,

So many thanks for helping to answer my doubt!! I just figured out the problem.. Since I am using an extended large monitor, the software does not detects the new screen resolution size and remain the same size as my small main monitor on the second larger monitor. This problem could be overcome by process the data in the small screen.

Anyway, thank you for your kindness!

Yes, there is a way to change the display size of the model in RES2DINV software.

To change the display size of the model, you can follow these steps:

Open your RES2DINV project file in the software.

Click on the "Model" tab in the top toolbar.

Select "Display Settings" from the dropdown menu.

In the "Display Settings" window that appears, click on the "Size" tab.

Here, you can adjust the width and height of the model display by changing the values in the "Width" and "Height" fields.

You can also adjust the aspect ratio of the model display by checking the "Constrain aspect ratio" box and adjusting the value in the "Aspect ratio" field.

Once you have made your changes, click on the "OK" button to apply the new display settings.

Note that changing the display size of the model may affect the clarity of the display. It's a good idea to experiment with different display settings to find the best balance between model size and clarity.