I need to know some places where i can test my sample for the BET SSA studies using carbon dioxide gas instead of nitrogen or argon.
Dear Ispita, I think, Physical and Material Chemistry Division, CSIR- National Chemical Laboratory, Pune, use CO2 gas for BET surface area calculations.
Thank you J C Tarafdar sir. I will surely look into it.
you could send me your samples i will find you with the answers...
How the lift and weight cancel each other perfectly for a helicopter to stay it motionless? Because its propeller do generate huge amount of lift due to air pressure plus a blend of air stream...
09 February 2021 3,990 14 View
Is there any formula, which can be used for the calculation of L10 i.e, peak noise level? Please give your opinion?
14 January 2021 8,408 3 View
The change in particle size is resulting in change in unit cell lattice paramaters in manganites. Please explain it in terms of crystallography and why is it so.
28 February 2018 1,590 3 View
I am to make a solution of Sodium Nitrate and a polymer which is hydrophobic. I have been trying with ethanol, but in vain. Please suggest me a procedure to make a solution of sodium nitrate.
07 November 2017 4,018 5 View
It was required for buffer preparation.
27 June 2017 3,684 3 View
14 May 2017 3,450 4 View
Hi all, basically this is a bioinformatics query, I have a 1000genome phase3 vcf file and a clinical bed file, i need to map the bed file against my vcf file to find only CNVs, but not indels, for...
13 October 2016 7,924 2 View
13 September 2016 4,655 8 View
sex ratio, fertility, hatchability, Japanese quails
17 August 2016 149 3 View
During drying of polyethyle glycol adipate, odor goes to intense and color becomes dark. Any possible expalanation or solution to this problem.
14 March 2016 4,395 2 View
Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !
02 March 2021 5,785 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...
01 March 2021 8,544 1 View
I want to build a low-cost polarimeter to study circular dichroism (chirality). What type of samples can I use? I am looking for samples that can be found outside the laboratory.
01 March 2021 9,101 3 View
Hi all, I have been working on the quantification of chitin in insect samples and feed for a while but I can notice that the quantification methods (e.g. exposure to HCl, NaOH, and weighing sample...
01 March 2021 1,843 2 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
When you use RIA, with a control the unknown sample with antibodies, you bare in mind the binding sites of the antibodies. However you still need to measure labelled antigen (radioactive) and not...
28 February 2021 2,133 3 View
I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...
28 February 2021 4,890 3 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View