I´m trying to get an optimal reservoir operation rule in a multireservoir system where some reservoirs have carryover storage. I had developed an operation model based on Kritski and Menkel´s method and uses generalized Storage - Reliabiliy-Yield relashionship. This model has been tasted and implemented in single reservoirs but not in a multireservoir system. I want to know if there are other carryover storage methods that have been implemented in a multireservoir system.
Thank you.
Here is an excellent reference (see chapter 7) that answer question.
Title of chapter 7: METHODS OF APPROACH FOR DESIGNING OPTIMAL STORAGE CAPACITIES AND OPERATIONAL STRATEGIES FOR MULTIRESERVOIR SYSTEMS
You can download this chapter at no cost from the following URL:
www.springer.com/content/pdf/10.1007/978-94-015-9894-1_7.pdf
Also, here is a link for another very useful reference:
http://ascelibrary.org/doi/abs/10.1061/%28ASCE%290733-9496%281997%29123%3A1%2815%29?journalCode=jwrmd5
The title is:
Network Flow Programming Model for Multireservoir Sizing
Hope this helps answer your question.
Professor Yehia Khalil
Yale University
USA
This is a very complex subject, that is analyzed by many authors with different methods. In my opinion, using Monte Carlo simulation could be a good idea.
In WEB you can find some papers as:
Multiobjective optimisation on a budget: Exploring surrogate modelling for robust multi-reservoir rules generation under hydrological uncertainty by Ioannis Tsoukala and Christos Makropoulos, availablr at
http://www.sciencedirect.com/science/article/pii/S1364815214002874
and
Improving multi-objective reservoir operation optimization with sensitivity-informed problem decomposition by JG Chu et al. available at
https://ore.exeter.ac.uk/repository/bitstream/handle/10871/21284/Improving%20multi-objective%20reservoir%20operation%20optimization%20with.pdf?sequence=1&isAllowed=y
Best regards
- Badges
- Science topic
- Similar topics
- Engineering
- Civil Engineering