Where can I find information on the toxicity of oxides of vanadium?

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Can anyone help or comment on solubilising chlorobutanol in aqueous injections in minimum time possible?

Please suggest solubilisation of chlorobutanol in injections. Tried pH and high temperature. But the issue is of assay drop. If anyone can suggest any solution. Its a commonly used excipient for...

21 February 2021 7,397 1 View

Color of spiro-ometad film?

What does the color of a spiro-ometad film indicate? I got purple, green, red, even black color of the spiro film. Is there anything we can get from the preliminary color analysis(e.g. oxidation...

21 February 2021 1,831 4 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

ZnS oxidizes to ZnO!!why??

when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...

14 February 2021 5,778 9 View

How to do the calculation for super oxide dimutase assay and how to calculate the R squared value in regression equation for catalase assay?

i have the enzymatic antioxidant assay by following the method of Misra and Fridovich, 1972 for super oxide dimutase and Luck, 1974 for catalase assay can any help me how to the calculation for...

11 February 2021 2,241 3 View

XRPD Quantification - Building a calibration curve of drug excipient?

I am aiming to utilise XRPD to quantify a drug excipient within a drug product and have been having a little trouble building the calibration curve to allow for this quantification up until this...

10 February 2021 6,145 3 View

How can I add the metal oxide NP's to the cell lines? I have to make some drug and NP conjuhgates. How much concentration to use? Need some help?

Hi everyone. I am working on metal oxides. I need to make some conjugates of drugs and NP. But I am unsure of what concentrations to make. I have read some articles, but they haven't mentioned...

10 February 2021 3,372 2 View

Are there any thermochromic materials that reflect infrared light (~9000nm) at 10C and transmit infrared light at 25C?

So I know some metal-insulators (ex VO2) have thermochromic infrared-reflective properties, but most of these are insulators at low temperatures and conductive at high temperatures. Some...

07 February 2021 1,770 3 View

SILAS DERENZO

You will find MSDS data sheets on the internet, typing vanadium oxides msds. Msds=material safety data sheet, that you will find for chemicals

Paulo Sergio Rangel Cruz da Silva

Thank you so much Atul Thorat, this review looks really interesting.

Tamás Sovány

http://www.who.int/ipcs/publications/cicad/en/cicad29.pdf