What's the highest performance a supercapacitor can achieve now?

12 December 2016 0 3K Report

Regardless of the materials. I'd like to know both the laboratory one and the commercial one. How much performance loss when the laboratory one is transferred to the commercial one?

Badges
Science topic

More Baohua Jia's questions See All

Anyone knows what is the biggest technological challenge in sea water desalination?

Why it is so expensive? What is the technological bottleneck? What is the current state-of-the-art technology and membrane used? Is there any good paper to read? Thanks!

08 September 2015 3,093 8 View

What you can do with a highly nonlinear laser patternable graphene film?

We recently developed a highly nonlinear graphene oxide film with extremely high nonlinearity...

04 May 2014 4,652 1 View

What's the major challenge of perovskite solar cells?

It is such a hot topic these days. What's the major challenge in this field? Is it really going to be a mainstream technology?

01 February 2014 9,331 14 View

What are the major challenges in Fresnel lens design and fabrication?

Is it high numerical aperture? High transmission? Or ultra-thin?

31 December 2013 1,151 6 View

Does anyone have access to Nature Nanotechnology?

I appreciate if anyone could send me this article: http://www.nature.com/nnano/journal/v8/n7/full/nnano.2013.99.html.

09 October 2013 7,685 4 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

Samples to study circular dichroism (chirality)?

I want to build a low-cost polarimeter to study circular dichroism (chirality). What type of samples can I use? I am looking for samples that can be found outside the laboratory.

01 March 2021 9,101 3 View

How to accurately quantify chitin?

Hi all, I have been working on the quantification of chitin in insect samples and feed for a while but I can notice that the quantification methods (e.g. exposure to HCl, NaOH, and weighing sample...

01 March 2021 1,843 2 View