What solvent should I use to prepare a 0.1 M titanium isopropoxide solution?

Have anyone checked before Cyclic voltammograms of intial ITO substrate and E-teck?

As a beginner in electrochemistry, I tried to obtain cyclic voltamograms of commercial anatase powder deposited on an ITO substrate or on Eteck. After several attempts, I noticed that my cyclic...

23 February 2021 3,175 3 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View

How to do a surface treatment of uncoated TiO2 with polymer?

Basically, I would like to know how to treat or coat on the uncoated bare TiO2 (Ti-OH rich) surface with polymer which has anchoring groups in the polymer structure like trimethoxygroups. What is...

21 February 2021 4,657 6 View

I want to remove TiO2 and SiO2 coating from surface. any one can help me?

I want to remove TiO2 and SiO2 coating from surface. I think that i should use HCl and MgCl2 and an oxidation agent such as potassium nitrate, but i dont know in which propertion should these...

14 February 2021 300 3 View

In Method prepreation, what is the meaning of (Fixed at), and the meaning of (mol% of somthing) and how to find the volume?

I need an explanation of this sentence: Firstly, SnCl4.5H2O with fixed at 0, 1, 3, and 5 mol% of TiO2 and Titanium (IV) isoproxide (TTIP) with fixed at 10 ml were mixed into 150 ml of ethanol...

10 February 2021 3,291 2 View

How can we quantify martensite in Ferrous and Titanium alloys?

How can we quantify metastable phases like martensite in Ferrous and Titanium alloys, in relation to their stable counterpart For example in EBSD, XRD, Optical? Eg, Martensite and Ferrite maps.

09 February 2021 7,572 3 View

How can simulate electroplastic effect using crystal plasticity?

Hi everyone, I hope you are all fine, As a part of my Ph.D. I'm trying to simulate eletroplastic effects on forming of titanium alloys. I'm trying to use crystal plasticity but I'm not sure if it...

20 January 2021 2,832 1 View

Best glass slides for metal oxide UV-vis and PL measurements?

Hi there, I am currently using Alfa Aesar fused quartz slides for my UV-vis and PL measurements of TiO2, but it seems that their slides emit in the UV around the same wavelength region where I...

19 January 2021 438 3 View

How can I calculate mean/average from a bi-modal distribution?

I have DLS data of my tio2 nanoparticles taken at different reaction times. Now there is bi-modality in the datas of all reaction times. The data is ofcourse through the CONTIN algorithm. If I...

14 January 2021 8,393 6 View

How to study pyridine anchoring mode on TiO2 by ATR?

I want to study the anchoring mode of a pyridine dye on TiO2 nanoparticles. I searched and a lot of papers study that by FTIR using by the attenuated total reflectance (ATR) method. I tried to...

12 January 2021 5,915 3 View

An-Giang Nguyen

Titanium Isopropoxide is soluble in ethanol, ether, benzene, chloroform. There is insufficient information to say the solvent can negatively effect on your experiment or not? You should think or confirm that.

Anna Jakimińska

The best solvent would be the isopropanol. It should not affect the syntesis negatively as it is the product of TTIP hydrolysis.