Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Do anyone here can help us in the field of molecular docking?

We have synthesized various metal complexes with different environment around the metals. Now to see the application of synthesized complexes we need this study also. we are also interested in...

01 March 2021 1,899 2 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Analysis of CRD two factor using R studio ?

Hello everyone. I have conducted the research on post harvest longevity of tomato crop using plastic packaging and different doses of chemicals as two different factors. The design of experiment I...

28 February 2021 8,189 3 View

What is the exact mechanism of the antimicrobial effect of local anesthetics?

The antimicrobial effect of local anesthetics has been known for more than 50 years, but it still seems to have an unclear mechanism of action. which bacteria? which concentration? etc etc. ....

27 February 2021 4,450 2 View

Grid connected inverter using virtual synchronous machine?

Hi everybody, currently, I am working on the grid-connected inverter. I want to make my grid-connected PV system a PLL-less system. I have studied some reachers are implementing a virtual...

07 February 2021 6,078 2 View

Can't run my IPMSM drive system with DC-supply higher than 125 V. Have anyone had similar problem?

Hey, I try to run my 4 pole IPMSM with PWSVM and use a typical controller with PI-controller with a current loop and speed loop. When I run my system with DC-supply 100 V with a steady-state speed...

28 January 2021 7,354 8 View

I am facing problem with integration of boost converter with single phase offgrid inverter?

i tested boost converter with MPPT and single phase offgrid inverter with close loop control separately. They work fine but when i connect them boost converter doesn't give the output as it did...

17 January 2021 6,428 6 View

"The following block is not supported in Phasor simulation?

I am designing a control system for Hybrid renewable energy systems using Matlab/simulink/simscape, but currently having a problem. Whenever I run the simulation, I get the error shown below. "The...

12 January 2021 2,142 5 View

Why do the Dual Central Inverter one is star connected and the other one is delta connected to the 12-pulse transformers?

It's hard to understand for me. And I need answers really quick. Hope you can help me.

21 December 2020 8,140 2 View

How to calculate the critical clearing time CCT ?

I need to measure the CCT from rotor angle graph >> is it possible ? HOW? it will be highly appreciated, if you advice any method to calculate the CCT

17 December 2020 8,763 2 View

If you have solar PV panels and a grid-tied inverter, what happens if the system is connected to the grid without a net meter?

If you have solar PV panels and a grid-tied inverter, what happens if the system is connected to the grid without a net meter?

13 December 2020 8,874 3 View

Distributed vs centralized photovoltaic system performance ?

Hello everyone, I have two questions and I would like it if you could help me out please. I need to know, in your opinion, what is the most efficient PV panel configuration between a distributed...

09 December 2020 4,606 7 View

Publicly accessible solar photovoltaic generation data?

I would like to ask if there are possible resources to access any freely available datasets of actual power generation from a utility-scale solar photovoltaic power plant on an inverter-wise basis...

29 November 2020 1,743 4 View

MPC for grid connected inverter with LCL filter generates dominant 3rd & 5th order harmonics. solutions to eliminate them?

Hi, I'm trying to design a three phase grid feeding inverter. Haven't used a transformer and grid neutral is grounded. LCL filter is being used. Id* and Iq* are references for grid current. These...

23 November 2020 6,562 3 View