methane gas can be produced from the break down of organic matter in the septic tanks.
What are the methods currently used for this?
Hope these links are helpful.
https://www.youtube.com/watch?v=R119xmFzK_k
https://www.researchgate.net/post/Can_a_home_septic_tank_sewage_tank_be_directly_adapted_as_a_reactor_for_the_production_of_biogas/1
https://www.homepower.com/articles/home-efficiency/design-construction/ask-experts-septic-system-methane
http://wolfeintransition.blogspot.in/2012/01/biogas-digester-septic-tank-for-our.html
Interesting links by Raju.
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
Hello experts, Does anyone know any free software about retention index prediction ?
08 August 2024 7,403 2 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...
06 August 2024 4,953 0 View
Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?
06 August 2024 980 5 View
There are anaerobic gas pak jars and environment providers in the laboratory that provide anaerobic environmental conditions for the growth of anaerobic bacteria. However, there is no anaerobic...
05 August 2024 4,945 3 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
or we can collaborate
01 August 2024 6,705 2 View
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View