What is the MDEA hydrolysis rate in the activated sludge system?

More Tjandra Setiadi's questions See All

Is there any data on Scotland Hourly Energy demand ?

Dear Dr. Wilson, Currently i do research on optimization of renewable energy (wind, solar, biomass, geothermal) distribution in Glasgow. Therefore in order to simulate, an average demand...

20 May 2018 7,676 3 View

How speed up Material Studio calculation?

I'm doing CASTEP and DMol3 calculation in Material Studio, it takes around 2-3 months to run just a single calculation and about 100GB of RAM. Can anyone suggest something to speed up the...

26 December 2017 2,506 9 View

A river starting to clear after rain and flocs appeared. Was it an effect of coagulation?

There was an interesting case in Segah River (East Kalimantan). The river starting to clear after rain (after a month of no rain) and flocs were appeared. Was it an effect of coagulation? (Be...

18 May 2016 1,420 6 View

How to Dedust Activated Carbon Granules?

Dear all, We are producing activated carbon from hazelnut shells but have an issue about the dust of the a.c. granules also known as the dust film on granules. Linear vibrating seives doesn't do...

11 July 2024 9,782 2 View

What is the exact procedure and materials for converting from ester to carbolic acid by base hydrolysis??

11 July 2024 4,645 3 View

What are these aggregates in activated sludge flocs?

I've been working with activated sludge samples and have encountered a challenge in identifying certain structures/organisms that appear abundantly within the flocs during optical microscopy...

23 June 2024 9,584 1 View

How to run Activated Sludge Model (ADM1) in Aquasim software?

I am trying to model a sequencing batch reactor using ASM1 in aquasim. I started from scratch create variables and processes but it doesn't work as I expected. How can I find the ASM1 package...

17 June 2024 4,466 1 View

Can an activated carbon be referred as nanomaterial?

Activated carbon are nanomaterial itself?

20 May 2024 8,832 3 View

Peroxisome proliferator-activated receptors (PPAR) agonist database?

dear all can you suggest where can i refer to the ppar agonist? where do we purchase the molecules?

02 May 2024 419 1 View

What are the best conditions for hydrolysis of 4-alkoxyacetanilides using hydazine monhydrate and ammonium iodide?

We aim to devise a technique for estimating 4-alkoxyacetanilides and their analogues by initially transforming them into the respective anilines. These anilines would then undergo diazotization...

29 April 2024 1,650 0 View

Is there any relation between surface area and amorphization degree in high-energy ball-milled activated carbon? The main source could influence?

I milled two activated carbons, with different main sources (shell nutt and bituminous coal). The shell nut AC did not increase in surface area but had some degree of amorphization after milling....

17 April 2024 3,897 1 View

Do I need to plot different calibration curve at each pH for dye adsorption study?

I am planning to study adsorption efficiency of dye at different pH. As we know, some dyes would change colour at different pH. Therefore, is it necessary to plot different calibration curve at...

16 April 2024 8,911 3 View

The amount of water needed during the impregnation?

How much water is typically used during the impregnation step? is there any relationship between the weight of carbon and the amount of water?

12 April 2024 2,952 0 View