exactly what happens if grain growth occurs at high temperature.
What is the effect on its applications?
optical properties will be improved
Are you trying to obtain a monocrystal?
no
i just want to know what happens if grain growth occurs in TBCs
and which thermo mechanical treatment is suitable as deformation treatment(rolling or forging)? Is it possible to take deformation temperature is below 1000 degree celcius for this particular...
10 November 2015 5,390 2 View
on what parameters this is depends? for rolling/forging how to decide their temperature?
10 November 2015 10,073 2 View
spraying processes such as APS ,HVOF Which one is the best for TBC and why ?
03 April 2015 8,168 1 View
on what property heat treatment affect on thermal barrier coating? is there is any change in adhesion strength of nanostructured zirconia thermal barrier coating ?
03 April 2015 8,827 2 View
1 Yield strength 2 UTS 3 Ductility 4 Elastic modulus
08 September 2014 8,974 2 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
Is anyone here using the Thermo Fisher Nano Orange kit for protein quantification, and detecting the fluorescent signal on the Promega Quantus? We are struggling to make sense of the standard...
05 August 2024 8,946 3 View
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container
30 July 2024 7,326 1 View