Hi

Do you see: http://www.eenets.com/Files/Download/chapter_5.pdf

They usually say you should ask the experts !

There are many methods reported in the literature to create a fuzzy model from the input–output data. The first method to create fuzzy systems from input/output data is a simple loop-up table method where each input/output data pair generates one fuzzy rule. Other methods use gradient descent, least square, PSO, or other optimization algorithms to calibrate the parameters in the fuzzy system.

Dear Mahboobeh

You said correctly, but you know fuzzy logic controller is not reliable and one of the most important factor in this challenge is rule base. How we can reduce this challenge to design a more reliable fuzzy controller?

Regards 

Dear Farzin..

try ANFIS in MATLAB, rules will automatically generate ......

ANFIS in Matlab is really the best. To construct the base system, you use genfis1 (using a grid partition on the data) or genfis2 (using subtractive clustering), but try various radii and bounds to give a good start up for the neural training.

Hi

Do you see: http://www.eenets.com/Files/Download/chapter_5.pdf

Hi Farzin Piltan, try this: https://www.researchgate.net/publication/220200065_Systematic_design_of_a_stable_type-2_fuzzy_logic_controller

Article Systematic Design of a Stable Type-2 Fuzzy Logic Controller

Dear Nohe Ramon

Thank's for your guide, but it could not help me.

For best design of FLC, you should known how to design rule depending upon experience with real system or using logical thinking. 

Yet, you can go for ANFIS for rule generation.

You can follow some articles as below:

http://www.eenets.com/Files/Download/chapter_5.pdf

http://www.eenets.com/Files/Download/chapter_5.pdf

etc.

Also dont forget to use MATLAB Help menu to understand FLC and FLC Design including rules.

Dear Deepak

Thank's for your answer, You said correctly experience knowledge has an important role but I also would like to find the other way to design rule base with the higher reliability.

Regards

Basic question is - do you have sample vectors (patterns) of proper input-output ? If you have, then there are at least 2 techniques:

(1) Define fuzzy sets to cover the range of each input/output variable. Convert each input-output pattern vector to a rule. Then merge these rules to get a smaller set.

(2) Construct a fuzzy neural network. E.g. classic fuzzy computational structure, with parameters tuned by training in  a way known from neural networks.

BTW you can also combine (1) and (2).

If these ideas suit your needs I can point to some references.

If you don't have samples, the expert knowledge sounds like the only solution.

check evolving fuzzy model (efm) for rule base and number of rule bases

I confirm that the best way to generate a fuzzy system is the gained experience. Moreover you can select different shapes of sets (triangular, trapezoidal, gaussian). The triangular and trapezoidal shapes have sharp course, but the most real systems show a smooth behavior. Most natural phenomena are not sharp. So it is proper and would be more natural in the first steps to select shapes with smooth course. On the other hand if you want to implement the fuzzy algorithm as a microprocessor program, it is easier to use triangular or trapezoidal sets in order to save computational time rather to use more complicated shapes.

uzzy logic was initiated in 1965 by Lotfi A. Zadeh, professor in computer science at the University of California in Berkeley. Since then Fuzzy logic has emerged as a powerful technique for the controlling industrial processes, household and entertainment electronics, diagnosis systems and other expert systems. Rapid growth of this technology has actually started from Japan and then spread to the USA and Europe. Most applications of Fuzzy logic are in the area of control.

The fuzzy rules can be defined based on human experience AND/OR experimental data.

So is like structuring a expanded algorithm? With assessment by experienced knowledge?

Fuzzy logic controller system is a system that examines the desired response (input), process this input and attempt to acheive a good output response. A fuzzy controller can be broken down into three main processes. The first of these is the fuzzification, this uses defined membership functions to process the inputs and to fuzzify them. These fuzzified inputs are then used in the second part, the rule-based inference system. This system uses previously defined linguistic rules to generate a fuzzy response. The fuzzy response is then defuzzified in the final process: defuzzification. This process will provide a real number as an output.

Using heuristic knowledge from system experiments.

Regards

Following....

The rules can best be defined on knowledge and experience for better results

From human experience by taking alpha cuts from input variables.

https://www.researchgate.net/post/What_is_the_standard_way_for_testing_a_fuzzy_rule_base_system

Excellent answers