How to solve melting and solidification of PCM using ANSYS Fluent?

Dear colleagues; I modeled 3D melting and solidification of phase change material filled heat exchanger and generated a (as in the picture below). First, I enabled melting and solidification...

19 January 2021 1,126 4 View

What are the shape functions of rectangular Q4 and triangular CST element models in natural coordinate system with (s,t) that ANSYS APDL will be used?

What are the shape functions of CST triangular and Q4 rectangular element models in terms of natural coordinate system (N.C.S) with (s,t) not with (x,y) in software programs as ANSYS mechanical APDL?

13 January 2021 7,968 4 View

What's the best suitable area element type like 182,and 183 quadrilateral and triangle for analysis of 2D FE modeling results, beams in ANSYS APDL?

I want to analysis of 2D FE modelling beams cantilever/simple support in ANSYS, then compare it with exact solutions (elementary) such as deflection or stresses, however what element types (solid...

07 January 2021 8,744 1 View

What's the best appropriate area element type like 182,and 183 quadrilateral and triangle for FE modeling results,analysis of 2D beams in ANSYS APDL?

I'm trying to carry out analysis of 2D FE modelling beams cantilever/simple support, then comparing it with exact solutions (elementary) such as deflection or stresses, but what element types...

06 January 2021 1,038 3 View

Why does bending stress(Sx) in ANSYS APDL direct below of point load FE 2D modelling simply supported point load higher than exact solution in value?

Why does normal bending stress/flexural stress value (Sx) just direct below a concentrated load of simply supported beam which is compression stress higher than the hand calculation Exact solution...

03 January 2021 8,462 3 View

Why does shear stress (Sxy) result in ANSYS APDL area element type solid 182 or 183 quadrilateral or triangle will be efferent in a cantilever beam?

Why does shear stress (Sxy) result in ANSYS APDL area element type solid 182 or 183 quadrilateral or triangle will be different in a cantilever beam with point load at fixed end or uniform load at...

31 December 2020 9,359 3 View

How to show effects of baffles on fluid flow?

Hello All I'm working on baffles inside a circular pipe, the problem that I'm facing is when I draw contour or streamlines, I have not found any effects for the baffles on fluid flow where fluid...

23 October 2020 2,002 3 View

How to select best Probability Distribution Function (PDF) for time series of extreme value data sets based on multiple Goodness of Fit (GOF) tests?

I have prepared an analysis of time series extreme values data sets (9 sets for different storm durations) by using three PDFs i.e. General Extreme Value (GEV), LogPearson III (LP III), and Gumbel...

11 October 2020 3,331 2 View

Can oligo hexamer primer produce sequencing error?

Hello everyone I conducted sequencing prosedure for RNA genome segment (about 700nt) , for this reason I employed the random hexamer primer for cDNA synthesis . after sequencing (by sanger...

16 August 2020 3,994 3 View

How do I know which type of mesh and its method is suitable for my geometry in ANSYS? How do I choose the right mesh?

If I wanna work on geometry and wanted to create a mesh for it, how can I be sure that my mesh I choose it is the best to give the right results

21 January 2020 6,095 4 View

How to determine the sample size of the prime-time television dramas?

I am working on my research project based on 1 year content analysis of the prime time (8pm-11pm) television dramas of three entertainment channels, how much sample size of TV dramas is required?

20 January 2021 5,021 1 View

No title

01 January 2021 5,831 1 View

Are there any remarkable processes in practice to valorise both solid and liquid contents of city waste to fine chemicals?

Could anyone please suggest me a good texts/methods about city waste management towards the fine chemical ends? I am interested to develop methods to process both solid and liquid parts to...

01 January 2021 6,201 5 View

Has any research on translation investigated the phenomenon of bilingual authors who produce versions of their books in both their languages?

Can the second-language version, strictly speaking, be considered a translation of the first-language version or is it merely a somewhat looser interpretation? How do such authors approach the...

10 December 2020 5,092 25 View

I teach a STEM career course for IT majors at a small liberal arts school. I am looking for collaborators/information sources for a new book ?

Looking for collaborators/info sources for a new book I am writing in the career/life coaching field on "Adult Bullies". Most research has been done on childhood bullying, however they eventually...

27 November 2020 6,532 1 View

Does anyone recommend any publication on the Japanese concept of "mabusabi" - specially refering to Shinohara Motoaki's works?

I am looking for materials that study Shinohara's concept of mabusabi and its demonstration in literature and visual arts.

10 November 2020 6,580 1 View

Recent bibliography on Jesuits' dictionaries and "artes"?

Hello, colleagues, Greetings from Brazil. I would like to know if you could recommend recently published material (open access, preferably) addressing Jesuits' dictionaries and "artes" from 16th,...

21 October 2020 1,046 1 View

Is there any complete documentation for HTM (Hierarchical Temporal Memory)?

Currently, I am working on implementing HTM for some of state of the arts problems. I am facing some issues actually. A complete documentation may help I think.

17 September 2020 8,875 1 View

How to properly provide help for students with specific learning disabilities in the fine art classroom?

I am writing my master's degree about students with specific learning disabilities in fine art classes and I am looking for some literature on that subject...

03 August 2020 3,066 7 View

Do you think a Virtual Design Studio can replace a typical physical design studio in future?

Design studio is essential in visual arts and engineering. With COVID 19, we need to find new methods/media to teach/practice design.

13 July 2020 6,705 3 View