in printing process
Lesson study teacher development approach
13 February 2024 6,946 0 View
Hi, I am doing a thesis on the above topic, can you please recommend information and materials I can use to compute the investigation. Thanks in advance
27 July 2023 4,064 2 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
Hello, I am experiencing an issue with mixing micro powder with resin in a 3D printer. The problem is that sedimentation occurs after a short period (about half an hour to an hour). Could you...
23 July 2024 1,672 0 View
Hi, I am doing aptamer based electrochemical biosensor. First, I cleaned screen printed gold electrode using 0.5M H2SO4. Then, immobilized aptamer followed by blocking using 2mM MCH. I use...
06 July 2024 9,852 1 View
Recently I've been working on a simulation of concrete 3D printing, and has successfully simulated a layer-by-layer 3D printing process using model change. However, when I proceeded to try...
06 July 2024 2,130 0 View
I am looking at ways to investigate the biodegradation of 3D printed specimen as part of my research. To what extent can SimaPro be used to do this? The idea is to demonstrate the biodegradation...
02 July 2024 2,730 2 View
I am polishing with emery papers with different grit sizes followed by diamond polishing and colloidal sols after ultrasonication with no scratch After that when I go to EBSD CI is not coming....
25 June 2024 2,402 3 View
I generated an I-Optimal DoE with only numeric factors (4 of them) with responses. After conducting my experiments, I was getting some strange ANOVA R squared values for some responses that...
07 June 2024 4,429 2 View
I want to perform electropolymerization on 3 system carbon electrode. How to cover the reference and counter electrode? I want to make polymer only on working electrode.
23 May 2024 1,681 3 View
I have a problem, in additive manufacturing (here specifically LPBF), if you make parts with different shapes through a fixed printing process, the parts will deform due to different geometry...
20 May 2024 7,549 3 View
I have 2 samples I have 3D printed PETG that was put in water for 1 week and 3D printed PETG that was not put in water I want to see if some compenents leaked into the water is FT-IR usefull for...
19 May 2024 9,290 0 View
