I am using an ALT200 CNC table from alpha laser. This machine has an option for a CNC controlled rotary chuck. There is a port for it on the table, but order was not placed for the rotary chuck.
Now that I want to interface a motor to it, some information on the port pinout is needed. If I insert the probes of a multimeter, voltage changes, but it reaches to almost 240 volts DC(it is an autoranging multimeter).
It would also suffice, if someone has the chuck and is ready to share the technical details of the attachment. It should look something like the figure at the bottom.
Can anybody identify the port, or its details?
cX HERE: Ushashri, M Masanta - Materials and Manufacturing Processes, 2014 - Taylor & Francis
Thank you Zol Bahri,
Ushashri had worked in my lab with the machine I had shown above. And M Masanta is a professor in my Department. Your suggestion of (cX HERE) are not clear. I could not find any link. Also Prof. Masanta does not have a clue about this port. The Laser welding machine is with my lab, and Prof. Masanta is in a nearby lab.
- Badges
- Science topic
- Similar topics
- Geoscience
- Asia
- India