What are the performance parameters one should consider to evaluate a IoT Network? Please also specify the relevant Simulator for this purpose also?

More Lokesh Chouhan's questions See All

How to empty large intestine in mice ?

Hi all I am working on colon-targeted drug delivery for which I kept mice fasting for 6h using fasting grills during scotophase (dark period). I observed liquid fecal content in the cecum and...

23 February 2021 7,701 2 View

Can I express protein of plant origin in E. coli strain (M15) using pET28a vector systems? Are M15 strains and pET vector systems compatible?

Are E.coli strains M15 and pET28a vector systems compatible? Can I over-express my protein which is of plant origin. Previously I was using BL21 DE3 strains. Was confused to use M15 strains for...

10 February 2021 2,564 3 View

Could not get reduction peak for Mxene Counter electrode in Iodide electrolyte, why?

I have deposited MXene Ti2C2Tx mixed with tritonX binder and heated at 250 C for half an hour in ambient air conditions on FTO glass substrate, the deposition technique followed was doctor...

28 November 2020 2,330 6 View

What are the best binder which can be used for deposition of MXene on FTO?

I would like to coat MXene (Ti3C2Tx) on FTO glass substrate using doctor blade deposition technique, for which i think a binder is essential for the adhesion of MXene onto the FTO. The post...

28 November 2020 9,360 3 View

Kindly suggest the best organic solvents used for dispersibility of graphite powder?

Kindly suggest me some good papers regarding a comparative study on various organic solvents used as dispersion medium for graphite powder. The application is to make a graphite paste and used the...

24 October 2020 1,586 4 View

What are the best used slurry to coat on TCO using doctor blade method?

I'm trying to deposit TiO2 onto FTO beforehand I would also like to have some knowledge on the other different types of slurry consisting of different materials to coat on TCO using doctor blade...

22 October 2020 1,427 1 View

Could anyone please suggest me some papers on using MXenes (Ti3C2Tx) as CE for DSSC application?

I'm currently working on MXenes as Counter electrode (CE) for Dye sensitized solar cell (DSSC) application. I would like to know about the research work being done in this area. Thank you in advance.

14 October 2020 9,448 2 View

Is it possible to coat/mix MXene (Ti3C2Tx) with conductive polymers such as PEDOT or PANI?

Could anyone suggest me some good papers which involves the coating or mixing of MXenes with conductive polymers such as PEDOT or PANI or any other conductive polymer for that matter.

12 October 2020 5,653 3 View

There is an ambiguity in understaanding stability from Bode plot. Could you help me out with this?

T1 = -67.34 s + 1.563e06 ---------------------------------------------------------- 0.0008762 s^2 + 0.09793 s + 2273 T2 = 2.447e07 s^2 + 7.695e11 s + 2.687e13...

05 October 2020 6,138 7 View

What are the various methods by which MXenes are deposited on the Transparent conducting oxide glass?

I would like to know the different deposition techniques and the respective conditions and constraints to deposit or coat a layer of MXene (Ti3C2Tx) onto a TCO glass substrate.

04 October 2020 4,616 3 View

What are the values needed for gabor filter's parameter for cifar10 data?

Hi, I implemented a code to gabor filter cifar10 data but the images after being filtered and stacked are not clear like the original images. I think the problem is in the way I am using the...

03 March 2021 6,317 1 View

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

How to calculate Total Flavonoid?

I analyzed flavonoid total spectrophotometry, the procedure as below: 2 ml supernatan added 5 ml dd.H2O, then added 0,15 ml NaNO2 5%, 5 minutes later added 0,15 ml AlCl3 10%, After 6 minutes,...

01 March 2021 6,722 1 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

How to calculate battery consumption for IoT device?

Hi, everyone I'm working on a privacy-preserving algorithm that will apply to IoT devices. So, I need to measure the power consumption by implementing this algorithm. Any suggestion, advice,...

25 February 2021 8,749 6 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

Ali Kadhum M. Al-Qurabat

you can refer to the following paper "Performance Evaluation of IoT Network Infrastructure"

Rafique, W., & Shah, M. A. (2016, September). Performance evaluation of IoT network infrastructure. In Automation and Computing (ICAC), 2016 22nd International Conference on (pp. 348-353). IEEE.

Ehab Rushdy

http://ieeexplore.ieee.org/document/7604944/?reload=true

http://eprints.lancs.ac.uk/87164/1/Fog_Orchestration_for_IoT_Services.pdf