What are the differences in characterization for nanocellulose based supercapacitors and supercapacitors?
I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...
03 March 2021 3,661 2 View
Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?
01 March 2021 9,447 3 View
Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...
01 March 2021 6,187 2 View
01 March 2021 7,254 3 View
Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...
28 February 2021 3,442 2 View
For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...
24 February 2021 1,265 6 View
24 February 2021 4,833 3 View
Currently trying to obtain as many pieces of research as possible for my dissertation around the implementation of DBT within the inpatient unit for those with a diagnosis of BPD. Primarily...
23 February 2021 5,654 2 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
Hello, I asm currently working with alginate and silk fibroin hydrogels. I prepared a blend of alginate and aqueous silk fibroin (straight from dialysis) and resorted to ionic crosslinking to...
23 February 2021 8,249 2 View
I use GPES software in Autolab instrument. when i set cut off in chronopotentiometery to investigate charge/discharge of supercapacitor, the potential not receive to the determined cut off. how...
05 January 2021 2,496 4 View
Supercapacitors are the future they say but is there any way to use them only without any battery along. As I have read that MIT is doing research for the development of this but there has been no...
10 November 2020 3,816 2 View
Aqueous electrolyte have a potential window of 1.2V, while organic and ionic electrolytes have higher potential windows. But what parameter is contributing to this enhancement in the respective...
19 October 2020 2,447 3 View
Supercapacitor application
14 October 2020 2,409 6 View
Planning to develop Graphene/Graphene Oxide/Reduced Graphene Oxide based Supercapacitor composite with 2D materials. Could anyone guide me which is best combination of 2D materials with...
05 August 2020 3,133 3 View
I have synthesized a polyaniline based composite and coated it on nickel foam. I performed CV in three electrode system at a potential window of -0.2 - 0.8 v. but the problem is : When I perform...
01 August 2020 9,399 3 View
I electrodeposited GO/PANI directly on electrode and dried at room temperature, then used it for Galvanostatic charge discharge via three electrode configuration in 1 M H2SO4. During charging...
20 July 2020 5,988 8 View
I am currently working on supercapacitors, have not got too much kniwledge on MD. I have to create a supercapacitor model..for that i am thinking the material to be rGO/metal oxide composite....
14 July 2020 3,344 3 View
Why Nd-doped PbTe showed a much lower BET surface area than Yb-doped PbTe?
20 June 2020 9,793 3 View
for electrochemical performance of supercapacitor electrode i am doing CV, Galvanostatic charge discharge and Potentiostatic EIS via three electrode configuration. is it necessary to do open...
19 June 2020 2,026 7 View