Epoxy coating products are used frequently in the automotive and aeronautical industries.  Various businesses employ epoxy coatings for specific industry uses and needs. Epoxy enamel is utilized in the military as well as in maritime commerce. Magnetite nano epoxy is used in protective marine coatings for steel….

Thanks for the information Sir

Dear Dr, Kakunje:

Recent Epoxy Coating Uses:

- Physical aspect: Paint, Resin and mass

The aspect has direct impact at about thickness of coating in the above sequence Paint, Resin and mass. As an example, resin coating exhibits 300-500 micrometers of thickness.

-Difficulty application level:

Increase close to the sequence: paint, resin and mass

-Multilayer uses:

Increase close to the sequence: paint, resin and mass.

-Composition:

There are single, binary, ternary and pentanary components.

-Applications:

Anti-acid coating, resin, strength to acid attack

Auto-levelling, resin, antiseptical rooms

Conductive coating, resin, drain at static charge

High performance coating, resin mono or multilayer, mechanical strength and erosion

Decorative coating, resin,

Protection of wall and floors, paint based on the water

Sealant coating, resin

Oil pipelines

Gas pipelines

Encapsulants, insulator, adhesives in electronic and electric components, liquid to cure in a pre-form

Adhesive in microelectronic

-Modified Epoxy Coating

Off-Shore and any similar structures coating based epoxy and flake or powder of glass

Alcohol tank coating based epoxy and flake or powder of glass

Petroleum tank coating based epoxy and flake or powder of glass

Fuel tank coating, paint, based epoxy and flake or powder of glass

Sulphur gas stack coating based epoxy and flake or powder of glass

High Humid ambient and anticorrosive multifunctional coating based multi component epoxidic paint with high charge of functional oxides

Concrete surface coating, epoxy mass, at around 2 mm of thickness, glass particle, SiO2 and/or oxides

  A filler type nanoclay would/can changing mechanical strenght and thermal conductivity, as well as fire resistance of coating.

Best regards

Marcos Nobre