What are the critical properties and the acentric factor of C12H23 (diesel) ????

Richard Rubén Rodríguez @Richard_Rodriguez17

09 September 2016 0 4K Report

these parameters are required to use the gas state equations in real conditions

Badges
Science topic

More Richard Rubén Rodríguez's questions See All

Which software Validated can be used to characterize a mixture of gases under real conditions ?

to a mixture of theoretical gas composed of elements C - H -O- N - Ar system under low temperature and high pressure , they are desired calculate properties such as specific volume ,...

06 July 2016 5,260 4 View

Why, in the literature, are the critical properties and acentric factor of monatomic gases H and O, and the OH not available?

To estimate the thermodynamic properties of mixtures of gases in real conditions.

02 March 2014 6,734 3 View

What is the critical temperature, critical pressure and acentric factor of the gases: H, O and OH?

Estimate the thermodynamic properties of mixtures of gases in real conditions.

01 February 2014 8,862 9 View

Which software is recommended to estimate properties of gas mixtures in real conditions using cubic equations (VdW, RK, RKS, PR, etc)?

Estimate thermodynamic properties of mixtures of gases in real conditions.

01 February 2014 4,221 21 View

Is it possible to use the Lee-Kesler equation for calculating the fugacity coefficient of a component in a mixture of gases?

Required to calculate fugacity 10 elements and chemical compounds present in a mixture of gases in real conditions.

31 December 2013 1,494 7 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View

Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

I'm looking for HVAC relevant topic for thesis?

Heating Ventilation Air-conditioning System related thesis topic for thesis

09 February 2021 4,215 5 View

NVT or NPT is preferable for gas adsorption simulation ?

Hi there, In order to perform molecule dynamic simulation on gas adsorption on substrate materials, NVT or NPT ensemble is preferable ? Thanks!

08 February 2021 173 1 View