Shot Peen Hardness With Nanoindentation

Pierre Leroux @Pierre_Leroux

11 November 2011 0 6K Report

http://www.nanovea.com/Application%20Notes/shotpeen-nanoindentation.pdf

Badges
Science topic

More Pierre Leroux's questions See All

Viscoelastic Analysis With Nanoindentation DMA

09 October 2011 10,034 0 View

Shot Peened Surface Characterization Using 3D Metrology

09 October 2011 7,483 0 View

Viscoelastic Analysis With Nanoindentation DMA

09 October 2011 3,444 0 View

Viscoelastic Analysis With Nanoindentation DMA

09 October 2011 2,218 0 View

Hardness mapping has been widely used to assess the variation of Mechanical properties across a large surface area. However, with the study of applica...

Hardness mapping has been widely used to assess the variation of Mechanical properties across a large surface area. However, with the study of applications such as glass it is the crack initiation...

08 September 2011 6,927 0 View

Stribeck Curve Analysis Using Tribometer

When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load can shift the lubrication from several regimes such as Boundary, Mixed and Hydrodynamic Lubrication....

07 August 2011 9,022 0 View

Stribeck Curve Analysis Using Tribometer

When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load can shift the lubrication from several regimes such as Boundary, Mixed and Hydrodynamic Lubrication....

07 August 2011 9,322 0 View

Breakthrough Indentation Yield Strength Test

Irvine, CA – Nanovea introduced its patent pending breakthrough method of reliably acquiring yield strength through indentation; ultimately replacing the traditional tensile testing machine for...

06 July 2011 2,491 0 View

Breakthrough Indentation Yield Strength Test

July 14, 2011 – Irvine, CA – Nanovea today introduced its patent pending breakthrough method of reliably acquiring yield strength through indentation; ultimately replacing the traditional tensile...

06 July 2011 3,399 1 View

Breakthrough Indentation Yield Strength Test

06 July 2011 9,970 4 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Can you recommend provider Intermediate laboratory test for hydrocarbon, polyethylene & polypropylene?

Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...

25 July 2024 8,108 0 View

Can we eliminate the stress singularity at the tip of the crack by manipulating the elastic constants?

The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.

25 July 2024 9,976 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View