Responsive polymer for liquid pumping in organ device

More Nopphadol Udomluck's questions See All

Method to prevent crosstalk fluorescene signal between 2 dye labeled microparticles?

My goal is to see two kinds of particles mixed well in an aggregated form. My experiment was as follows: 1. Prepared Microparticles 1 + EDC/NHS + RhoB, and Microparticles 2 + EDC/NHS + FITC. 2....

19 June 2024 2,680 1 View

How can I reduce the autofluorescence of gelatin microparticles?

I have been doing research on gelatin microparticles (crosslinked glutaraldehyde), and I need to perform qualitative analysis by using a confocal fluorescence microscope. However, the...

28 March 2023 3,999 4 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 940 3 View

How to increase simulation box size?

We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...

08 August 2024 4,841 0 View

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 612 3 View

Hi, please what is the best tool on Aspen plus that can help me get the best inlet temperature and pressure for cryogenic distillation?

I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...

06 August 2024 4,609 0 View

Are air moisture harvesting technologies effective in combating desertification?

Air moisture harvesting Air water collection devices

06 August 2024 5,471 2 View

How much Yeast should we add to fermentation media?

I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...

06 August 2024 662 1 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 946 1 View

What is the best protocol for freezing the rat brain in preparation for protein detection by Elisa ?

What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?

01 August 2024 1,722 1 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,833 3 View

How to explain the different interaction between soluble and insoluble polymer in water?

Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.

29 July 2024 6,350 3 View

Abdelkader BOUAZIZ

Dear Nopphadol Udomluck, would you please give more details. Find an attached interesting document. My Regards

Nopphadol Udomluck

Thank you, Mr.Abdelkaber.

That is what I want to discuss. I'm trying to develop the tube-shape micropump for using in in vitro experiment first.

Wish you all success, waiting for any results you share or just inform about any published work. Kindest Regards