Relevant ASTM standards that are commonly used for testing the properties of 3D-printed short fiber-reinforced polymer composites?

25 September 2023 0 3K Report

Can you provide guidance on the relevant ASTM standards that are commonly used for testing the properties of 3D-printed short fiber-reinforced polymer composites, such as thermal, vibration, acoustic, and biodegradation profiles?

Badges
Science topic

More Prashant Anerao's questions See All

What is the maximum value of Divesity Gian in MIMO? For two antenna system its 10dB. As no. of antennna increse diversity gain increase or decrease?

Somewhere on the internet, it's reported the maximum diversity gain limit theoretically can be achieved is 10dB. Some papers said it increases with more antennae and some said it will decrease.

09 June 2024 5,121 2 View

Fully funded phd ?

any fully funded phd position in wildlife ?

25 May 2024 7,976 2 View

Access to document containing CPCB calibration curve and uncertainty for PM2.5, SO2, O3, and NO2 monitors?

I am wondering if anyone has come across calibration curve and uncertainty for PM2.5, SO2, O3, and NO2 monitors maintained and operated by the CPCB? Please share link herein for the same if you...

25 April 2024 7,164 5 View

How to model or program a cascade refrigeration system using natural refrigerants on MATLAB ?

What are different ways of modelling and simulation of cascade refrigeration cycleusing natural refrigerants on MATLAB without using simscape ? How to write program for it and connect MATLAB...

02 April 2024 487 2 View

Classical text is important or research journals are important?

because people are citing/talking less about Classical texts discovered by Rishi/sages. Rishi has the broad scientific knowledge as per their practical and theoretical practices.

30 March 2024 2,013 0 View

How to interpret the LCMS data with using peak values?

How to evaluate the compounds with usage of peaks and their respective values in LCMS - TOF instrumentation? Is there any web portals for the data interpretation? I Have got Both LC (2 Files) MS...

13 March 2024 7,940 1 View

Understanding factors leading shift from spiritual-cultural drinking to modern alcohol consupmtion in Warli tribe?

Alcohol consumption shift. Socio-econo-cultural factors, globalisation, westernisation, religious conversion role in alcohol consumption shift

12 September 2023 4,757 0 View

How fin and fan design is done for for thermoelectric refrigeration system ?

I have not understood here the method of design of fin and Fan for thermoelectric refrigeration system in paper attached .....................

09 August 2023 8,355 0 View

What best method to obtain correct composition of Al2024 series ? OES or EPMA?Steps?

I have tried OES method to obtain composition of 2024 T4 multiple times. As per standard composition Cu should vary between 3.8-4.9 and Mg should vary between 1.2-1.9. The problem coming is that...

18 July 2023 450 0 View

Are D16AT and 2024-T4 same ??

In all research paper i found the Aluminium alloy D16AT and 2024T4 having same chemical composition . They are subjected to same heat treatment process. Are they different or same ???

16 July 2023 8,039 4 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

Environmental Impact of the Organic Manure Production Unit?

Does anyone have any case studies on the Environmental Impact of Organic Manure Production Unit? Environmental Impact of a Organic Manure Production Unit Facility is what I studied but...

16 July 2024 5,400 6 View

Why am I seeing only one initial maximum in torque-time curves for the fusion of PVC in a Brabender?

We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...

12 July 2024 2,768 1 View

How to solve "1 elements have missing property definitions" in Abaqus?

I am creating a single element model in Abaqus of a composite material. My goal is to match the stress-strain curve of the material which was obtained experimentally. I am using VUMAT for Fabric...

07 July 2024 10,036 5 View

Can SimaPro be used to simulate/analyse Biodegradation of Specimens?

I am looking at ways to investigate the biodegradation of 3D printed specimen as part of my research. To what extent can SimaPro be used to do this? The idea is to demonstrate the biodegradation...

02 July 2024 2,730 2 View

What does the area under the curve signify in dielectric loss tangent studies for solid polymer electrolyte ?

In solid ceramic electrolyte what is the Physical significant of area under the curve in dielectric loss tangent studies ??

23 June 2024 4,354 1 View

Calculating Transfer Function for multiple simultaneous vibration excitation?

I have a structure which is subjected to random vibration with a shaker through a fixture/adaptor. The fixture is mounted on the shaker and the structure is mounted on the fixture. When the shaker...

22 June 2024 5,141 1 View

Can anyone explain how mobile ions moves inside ploymer electrolytes?

I want to know the exact mechanism behind the motion of ions inside the polymer electrolytes.

13 June 2024 3,489 0 View

What is the breakdown voltage/dielectric strength of Polyvinyl Alcohol?

I searched everywhere and I can't find a single definitive source, the only paper that I found was this one:...

12 June 2024 3,126 3 View

How can I see the modes of vibrating in a 3D model with opensees?

Hi, I am calculating the periods of a steel building modeled as a 3D moment frame. Is there any script to display the shape of vibrating of the model in opensees?

12 June 2024 8,065 1 View