What is the porosity range of porous hydroxyapatite? Please indicate the sources. Thank you!
The porosity of hydroxyapatite varies from 33 to 78 % based on pore size and porous volume of the hydroxyapatite
advise work
17 April 2024 3,610 0 View
What are the mechanical properties of the maxillofacial material Tera Harz TC-80DP? What works contain such information? Thank you!
12 March 2024 3,732 3 View
They don’t always gather even when the weather changes.
17 February 2024 2,228 4 View
Is this dental material classified as ceramic? Does it contain hydroxyapatites?
31 January 2024 2,409 3 View
What works describe these methods? Thank you!
30 November 2023 9,989 4 View
Crowns made from Tera Harz TC-80DP material can be used to fuse with a tooth and subsequently replace it, like, for example, bone substitutes made from hydroxyapatite, or can such crowns only be...
01 November 2023 1,107 3 View
Please advise any work to influence the structure of the Tera Harz TC-80DP material. Thank you!
17 October 2023 8,978 0 View
What kind of material is Tera Harz TC-80DP for maxillofacial surgery? What is its composition? Where can I view SEM images of this material? Thank you!
15 October 2023 1,667 6 View
We need work where the structure of this material is affected, as well as the composition and sem analysis of this material. Thank you!
10 October 2023 1,481 1 View
Please advise resources where you can search for dissertations using keywords. We need sites where you can choose the type of scientific work (article, dissertation, etc.). Thank you!
08 October 2023 450 2 View
I prepare Mg doped Hydroxyapatite by wet preipitation but (Ca + Mg)/P ratio is higher than 1,82. CaO peak cannot be detected in XRD spectrum
23 June 2024 8,970 19 View
I can't find any supporting details about this. Thank you so much
28 May 2024 5,878 2 View
FeCrAlloy® foils are commonly used for fabricating metallic monoliths. However, their lack of specific surface area/roughness (pores) hinders catalyst adhesion during the coating process. Several...
22 May 2024 8,462 1 View
I wanted to ask if there is a difference between connected components analysis and pore network analysis? I am trying to find porosity of a coating on a coated sample and I want to know which...
25 April 2024 2,992 1 View
Hello all! I have synthesized hydroxyapatite nanoparticles and have to characterize them with DLS and SEM analyses. Can someone please let me know the sample preparation methodology for DLS and...
06 April 2024 7,614 5 View
Greetings colleagues, can anyone explain to me about solubility of hydroxyapatite shyntezised HAp from eggshell. what are the parameters of solubility HAp in water?
25 March 2024 9,247 1 View
On many articles I found the following equation to measure porosity of hydrogels: Percent porosity = (M2 - M1) / pV × 100 Where M1 and M2 are the mass of the hydrogel before and after immersion...
07 March 2024 1,266 1 View
I am trying to understand the difference in the spreading rate of supercritical-CO2 plume for a stacked reservoir. The hypothetical reservoir has two permeable horizons, separated by a...
31 December 2023 350 6 View
I have XRD data of my synthesized hydroxyapatite (HA) and I want to compare it with standard HA peaks
13 December 2023 825 1 View
For some time, I have been studying how porosity, inclusions and surface roughness contribute to build up of localised equivalent plastic strain. For this I have used a simple strain hardening...
13 November 2023 2,615 1 View