Dear Kanat Suleimenov

Our following publications may help you to measure the impedance (inductance & resistance) of a PMSM (or induction machine):

[1] A. Weerasinghe, Z. Zhao*, N. B. Narampanawe, Z. Yang, T. Svimonishvili, and K. Y. See, "Single-probe inductively coupled in-circuit impedance measurement," IEEE Trans. Electromagn. Compat., 2021, doi: 10.1109/TEMC.2021.3091761.

[2] Z. Zhao, F. Fan, W. Wang, Y. Liu, and K. Y. See, "Detection of stator inter-turn short-circuit faults in inverter-fed induction motors by online common-mode impedance monitoring," IEEE Transactions Instrum. Meas., vol. 70, 2021, Art no. 3513110.

[3] Z. Zhao, F. Fan, A. Weerasinghe, P. Tu, and K. Y. See, "Measurement of in-circuit common-mode impedance at the AC Input of a motor drive system," in Proc. IEEE Asia-Pacific Symp. Electromagn. Compat. (APEMC), 2021, accepted.

[4] A. Weerasinghe, Z. Zhao, F. Fan, P. Tu, and K. Y. See, "In-Circuit differential-mode impedance extraction at the AC input of a motor drive system," in Proc. IEEE Asia-Pacific Symp. Electromagn. Compat. (APEMC), 2021, accepted.

[5] F. Fan, Z. Zhao, P. Tu, H. Jie, and K. Y. See, "Impact of motor stator winding faults on common-mode current," in Proc. IEEE Asia-Pacific Symp. Electromagn. Compat. (APEMC), 2021, accepted.

Dear Zhenyu Zhao, thank you! I will check!

Dear Kanat Suleimenov

No problem. Feel free to contact me know if you have any further questions.

Based on the measured impedance of PMSM in the frequency range of interest, you can then extract the correspondent inductance and resistance parameters. The following publications show the details of how to extract these parameters from the measured impedance:

[1] B. Mirafzal, G. L. Skibinski, R. M. Tallam, D. W. Schlegel, and R. A. Lukaszewski, “Universal induction motor model with low-to-high frequency-response characteristics,” IEEE Trans. Ind. Appl., vol. 43, no. 5, pp. 1233–1246, Sep./Oct. 2007.

[2] M. S. Toulabi, L. Wang, L. Bieber, S. Filizadeh, and J. Jatskevich, "A universal high-frequency induction machine model and characterization method for arbitrary stator winding connections," IEEE Trans. Energy Convers., vol. 34, no. 3, pp. 1164-1177, Sep. 2019.

[3] Z. Zhao, "Measurement setup consideration and implementation for inductively coupled online impedance extraction," Ph.D. thesis, Nanyang Technological University, Mar. 2021.

[4] Z. Zhao, K. Y. See, W. Wang, E. K. Chua, A. Weerasinghe, Z. Yang, and W. Chen, "Voltage-dependent capacitance extraction of SiC power MOSFETs using inductively coupled in-circuit impedance measurement technique," IEEE Trans. Electromagn. Compat., vol. 61, no. 4, pp. 1322-1328, Aug. 2019.

Dear Zhenyu Zhao, thank you, I appreciate it!

In general, my research is related to application of advanced control methods to PMSM. We have a laboratory setup. At this stage, I want to get real values of inductance, resistance, and magnetic flux linkage for the motor. If you are interested in future collaboration, it would be nice for me to work with your team!

Sure, I am looking forward it!

Best Regards

Zhenyu

Dear Kanat Suleimenov

I suggest to you reading this book "High Performance Control of AC Drives with Matlab/Simulink" ,it contains the parameters values used in a PMSM drives.

K.Djaloul.