P-type mcSi and p-type CdTe solar cell - Is there any relation of potential induced degradation (PID) between them?

Whether defects or thickness or both are responsible for PID?

05 June 2019 389 3 View

I know UV radiation change color of organic/Bio materials. Does it impact on dye synthesized solar cell performance or not?

09 October 2016 3,053 3 View

Si SPV efficiency progress; cell structure (tandem, for high Voc) or surface high absorption nano coating (for high Iph); which is best option?

03 April 2016 2,446 4 View

Energy density and mass flow from current/H and voltage/E aspect -i mean electrical- electronic or EM energy aspect how can be classified?

09 October 2015 8,557 0 View

How field or field assocoated frequency influence RF energy flow and its outcome to induce heat in biological system?

Biological effect of Rf radiation and for its impact analysis both field and frequency consideration are important. But tissue heating impact either influenced by field or frequency (considering...

08 September 2015 4,370 2 View

In any living system oxygen-constituent -related luminescence peaks an indicator of its healthy stage?

03 April 2015 5,252 0 View

Emerging solar cell - Trade-off between dielectric permittivity related binding energy and thermalization energy- how impact on efficiency?

01 January 1970 2,825 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

SDS page software for analysis?

I did sds page to determine the difference in protein expression between 3 types of vaccine , but i don't have scanner or densitometer available. . so i wonder if there is a software to analyze...

02 March 2021 6,270 3 View