First Image: Inficon style contacts
Second Image: Side-contacts
We want to build a holder for the Inficon style crystal (with back leads) for our pierce oscillating circuit QCM. Any help is greatly appreciated! Thanks so much!
http://www.testbourne.com/files/2015/07/21/84d7ed7f678590d4e4f7fce3514f1ce2/RQCM-sensor-crystals.png
http://orders.gamry.com/media/catalog/product/cache/1/thumbnail/600x/9df78eab33525d08d6e5fb8d27136e95/q/u/quartz_crystal.jpg
Hello,
if it is still of interest...
Why not use the inficon experiment crystal holders (ok - aside from maybe pricing).
I can see 2 (near-)semi-circular electrodes. One of these semi-circles is clearly connected to one of the electrodes, but from the picture it is not clear whether the 2nd semi-circle has a connection to the other electrode.
Though - it would not hurt: if you rotate the inficon style quartz by 90 degrees (relative to the image given), it should fit the holder from the 2nd image. Where is the problem?
Regards
- Badges
- Science method
- Similar topics
- Methodology
- Crystallography