I am working on the add the properties of the Nanofluids and Nano-coating particles. Is there any reference that describes the properties of the nano fluid and nano-coating?
I've wrote a review article on nanofluids that you may find interesting and useful or your question. Link to the article:
https://www.hindawi.com/journals/jnm/aip/6978130/
In addition, I would say, If you want to connect between nanofluids and nanocoatings you can look at it as following:
1- The nanoparticles on the coated layer could be separated with time from the coated surface, due to shear stress, into the fluid. This happens at room to low temperatures and hence, the vol% of particles would increase in the basefluid; or
2- At above room temperature, the nanopaticles in the nanofluid could form what is known as 'nanofouling'. Meaning that the nanoparticles will tend to form a nanolayer on the surface and hence, you get a similar mechanism as the nanocoating on that surface. Depending on the pH of your fluid, this surface could have a hydrophilic or hydrophobic behavior.