I am sintering with a microwave high-temperature oven. at 1280 degrees my sample is crushed
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container
30 July 2024 7,326 1 View
Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?
25 July 2024 5,482 2 View
Could you provide information on the average energy consumption per gate operation when using superconducting qubits, specifically focusing on the microwave power required to implement gates? I...
15 July 2024 954 0 View
I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...
10 July 2024 2,789 4 View
..
10 July 2024 3,444 4 View
as of my knowledge z90 is acrylic based sealant adhesive.
09 July 2024 8,660 4 View
Dear Prof, is there a subtle distinction between the terms "substitution" and "doping" when referring to modifying ceramic dielectric materials for example Na0.5Bi0.5TiO3? Is there any difference...
08 July 2024 2,043 3 View
No mention of CMB or normality
05 July 2024 6,629 1 View
In solid ceramic electrolyte what is the Physical significant of area under the curve in dielectric loss tangent studies ??
23 June 2024 4,354 1 View