if there is somebody who can help me with modeling an electromagnet 12V Dc and a piece of material placed on the electromagnet core to study the effect of current flux on the mechanical properties of the material.
Hello
I advise you to and seek assistance from the ABAQUS mailing list
https://groups.yahoo.com/neo/groups/Abaqus/info
Search the archive of the list before posting in it.
The list does not accept attachments.
Regrettably, the list is not very active in the last weeks or it takes a long time to disseminate the mailings.
You can also try
http://imechanica.org/
Good luck
Frank
I recommend you to use FEMM free SW for magnetic modeling.
http://www.femm.info/wiki/HomePage
It is free and simple to start with. It is only for 2D models (planner od cylindrical). There is an example similar to your application
http://www.femm.info/wiki/RotersExample
You can simply modify geometry and parameters. There is a library of basic materials. In my experience, the material library excellent fit reality.
This study explains terms systematically with all those religious practices and doctrines in which Samaritans and Jews differ. Only be achieved if it is contextualized within the contemporary...
07 January 2024 2,268 0 View
Does anyone have experience doing scratch assays in stem cells in 96 well plate using the wound maker? I notice that after doing the scratch and washing twice, the cells round up and there are...
25 January 2021 7,408 3 View
I want to analyze 48 germplasm through ISSR marker. After documentation, it produced 102 loci and make a binary data matrics for analysis through Popgen32 software. Data input is ok but when I am...
11 January 2020 2,951 3 View
EGFR in order to be detected by western blot needs to be separated as a whole non denatured protein so antibody can bind and then can be detected, so SDS can not be used or even beta...
18 July 2016 1,048 5 View
Normalizing ANN database
01 October 2014 1,998 11 View
I want to preprocess a dataset for them to have information, e.g. the occurrence of each value. Which artificial intelligence technique would you recommend?
31 December 2013 10,012 5 View
Recently I started reading some publications about reliability analysis, and I found that The Weibull analysis is a powerful technique. My question is about estimation the parameters of weibull,...
03 November 2013 4,155 6 View
Researchers in the field of biochemistry often use it to study the effect of chemical compounds derived from medicinal plants and herbs, and their effect is studied in the laboratory on patient...
01 January 1970 6,188 2 View
please i need journal within Scopus gave rapid acceptance and low fee in medical science [email protected]
01 January 1970 6,575 3 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
I am currently using CASTEP version 2020. When I want to run optical properties calculations with spin-orbit coupling(SOC), I encounter the following error in a pop-up window before the job gets...
02 August 2024 2,890 0 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...
25 July 2024 8,108 0 View
The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.
25 July 2024 9,976 3 View
In cases where the rotational of the magnetic field H is zero, we can define this field as the gradient of a scalar function defined as the magnetic scalar potential (similar to the electric...
21 July 2024 9,633 4 View
I am using gelatin to model mechanical properties of brain tissues in-vitro. Do you have any suggested concentration ? Thank you so much.
19 July 2024 3,095 0 View
..
10 July 2024 3,444 4 View
The diagram suggests that there is a contradiction within the second law of thermodynamics and Carnot's efficiency theory. According to the second law, Carnot efficiency is independent of the...
08 July 2024 7,478 4 View
For the PDMS material, it's linear thermal expansion coefficient is about 3.2*10-4/℃. The polyimide has a smaller linear thermal expansion coefficient like 2*10-5/℃, but it cannot be stretch. It...
04 July 2024 4,525 1 View