Can anyone suggest me AI and WSN integrated Simulators and Emulators which are more suitable for real time applications?

For building the prototype of any of the real-time applications, the algorithms mostly are AI based AI-based. Hence, it would be better if the integrated tool is available to develop the...

07 June 2020 8,580 6 View

How to avoid dissolved gasses in Ni base alloy melting practice?

Ni with 3%Si tapped at 1300 degree Celsius shows bubbles structure on the Riser top.

23 November 2018 348 3 View

How do I store/handle the polymeric electrospun scaffolds?

I have been producing polycaprolactone fibers by means of electrospinning on an aluminium foil onto a metallic collector plate. After the polymer fibers have deposited on the foil, I remove it...

24 April 2017 7,903 3 View

What is the best method used to align the diffractometer plane/axis with respect to the incident beam direction?

Most of the XRD community is presently using 0D point counter or 1D linear PSD (position sensitive detector) in powder diffraction as well as rocking curve analyses. Any mention of the extinct...

02 December 2016 5,307 3 View

How do I calibrate the diffractometer 2Theta angles with this powder diffractogram of corundum standard from a Bruker D8 XRD instrument?

04 November 2016 4,212 4 View

How do I compute b, Burgers Vector correctly using the Hirsch approach to computing dislocation density employing XRD rocking curve profile analysis?

19 September 2016 2,394 8 View

SiC 6H - What periodicity would create a Debye-Scherrer arc at about 2 degrees 2-Theta using Cu K Alpha 1 only in HRXRD observation -1 to +3 degrees?

While collecting XRR data (-1 to +3 degrees 2Theta) for a SiC 6H 75mm diameter wafer, a reflection was observed at about 2 degree 2-Theta on the 2D detector as well as the XRR Omega-2Theta scan....

12 May 2016 8,437 2 View

Are there case studies on larger adoption of agriculture technologies after adaptive trails at farmers field?

An adaptive trail result that can make larger impact for more communities to adopt

03 March 2016 3,757 5 View

Is there a unit of mass flow rate/volume flow rate by the name "Stoc"? How it may be converted into SI units?

Must be some old unit of measurement.

07 December 2015 3,795 4 View

What depths can one typically probe with XRR, X-ray Reflectivity/Reflectometery?

10 November 2015 4,438 14 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Guidelines for survey (question type) analysis?

Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...

03 March 2021 2,037 3 View