Microbial action
Please, How can I apply 2sin(2pi*4*t)+3sin(2*pi*5*t)+7sin(2*pi*7*t) in abaqus. I realized I cannot use periodic amplitude for this due to the fact that the subsequent frequencies are not...
17 April 2020 3,050 4 View
aqueous and further partition with solvent based on their polarity or start extraction with different solvents
10 September 2019 9,151 2 View
On trying to identify heavy-metal resistant bacteria, i first contaminate a soil with heavy metals and check for the microbial load, i allowed it for 100days of natural attenuation and check the...
18 December 2018 8,469 3 View
Our potentiostat gives this error upon assembly of the 3 electrode system. I have tried refilling the reference electrode with saturated KCL without no bubbles, but its still gives the message. I...
17 June 2018 505 3 View
The academic environment is as encompassing as the globe. What yardsticks can we use to determine a successful academic in the world of today.
19 July 2017 3,948 46 View
I am trying to simulate flow around a circular cylinder using ANSYS FLUENT. I did formulated my problem and solved till convergence. However, I was unable to validate the existing coefficient of...
20 January 2015 1,107 19 View
I will like to do modeling and simulation of solar pond in Ansys. Can anyone give a guide on how to go about it keeping in mind that solar pond get incident radiation from solar source? Thanks.
21 July 2014 7,756 4 View
Most studies use R&D investments, patents or brands to measure firm innovativeness. However, some firms specifically in developing economies do not disclose these items in their financial...
01 January 1970 1,761 7 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.
26 February 2021 5,851 1 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View
Hello I'm currently working on a topic related to studying the anaerobic biodegradation of TPH in marine sediments. In this work, sediment should be mixed with fuel oil to a concentration of 20 g...
24 February 2021 9,839 3 View
24 February 2021 1,365 3 View
24 February 2021 5,378 1 View
As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...
24 February 2021 1,349 1 View
Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...
23 February 2021 1,908 2 View
I am working on synthesizing and then purifying peptides using the SPPS system. After purification of the peptide, the peptide powder is obtained using a freeze dryer. When measuring the powder,...
22 February 2021 10,099 5 View
Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....
22 February 2021 9,972 4 View
