Thanks
I compacted unbound aggregates at optimum moisture content and then let it dry in the oven for one day. The repeated load triaxial test was carried out on this sample in which I faced a weird...
07 August 2019 3,505 9 View
Given the presented scatter-plot, it is looking like that there is a relationship between X and Y in my data. Unfortunately, the simple nonlinear curves can not describe this relationship....
01 February 2019 7,393 32 View
I have a function as follows: y= a*x^b a=7e-5 b=-0.755 I attached a simple graph of the function. As it is apparent from the graph the CURVATURE of the function increases from ZERO to a finite...
01 February 2019 8,015 8 View
I have andesite source of road aggregates. I did XRD test on bulk powder and oriented samples ((1) air dried, (2) treated with ethylene glycol at 60oC, and (3) heat-treated at 550 oC for 45...
11 December 2018 6,410 3 View
I mean after doing the compaction practice in various water contents and determining the dry density corresponding to each water content, what would be the equation of the resultant compaction...
10 November 2018 7,395 11 View
I conducted CBR tests on unbounded aggregates. As you can see the CBR test results in the attachment, the curves concave up and there is a relatively enormous shift between two test results....
10 November 2018 1,610 7 View
I have a sort of data in which the change in the weight of materials is recorded during the time. Unfortunately because of special condition I cannot record the weight in the first 75 seconds. -...
09 October 2018 2,681 13 View
A solution in MATLAB Software is preferred.
09 October 2018 8,118 5 View
Could you please find the attached image and let me know if the presented data can show any weathering in the glass. Based on my understanding, the glass in the structure of my materials remained...
09 October 2018 8,163 1 View
SPSS software is preferable :)
08 September 2018 2,286 5 View
I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?
11 August 2024 3,115 1 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
I want to know more about Uranium ore deposits in world.
11 August 2024 6,720 0 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...
10 August 2024 4,005 2 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...
09 August 2024 7,892 0 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View